Skip to main content

10.4.2 Restoring the Server


10.4.2 Restoring the Server
  1. Install the upper cover.
    For details, see "6.1.3 Installing the Upper Cover."
  2. Close the fan cover.
    For details, see "6.1.4 Closing the Fan Cover."
  3. Install all the HDDs/SSDs or internal storage filler units.
    For details, see "9.4 Installing an HDD/SSD."
Note - Reinstall the HDDs/SSDs at their original locations by referring to the record that you made before the start of maintenance.
  1. Put the SPARC M12-1 into the rack.
    For details, see "6.1.5 Putting the SPARC M12-1 Into the Rack."
The FRU installation work is completed. See "Chapter 7 Maintenance Flow" to continue maintenance work.