2.4.2 LEDs on the Rear Panel (System Locator)
2.4.2 LEDs on the Rear Panel (System Locator)
The field engineer or system administrator can identify the SPARC M12-1 requiring maintenance by using the CHECK LED (A in Figure 2-10) on the rear panel. The CHECK LED on the rear panel is referred to as the system locator, and has the same function as the CHECK LED on the operation panel.
Figure 2-10 Location of the System Locator
|
![]() |
Icon | Name | Color | State | Description |
---|---|---|---|---|
![]() |
CHECK | Amber | On | Hardware has detected an error. |
Blinking | SPARC M12-1 specified at execution of the XSCF command instructing the blinking. This (locator) is used to identify the location of the SPARC M12-1 requiring maintenance. | |||
- | Off | The system is in the normal state, or the power is disconnected or otherwise not being supplied. |
< Previous Page | Next Page >