Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12-1 Service Manual >
  9. 5.3.1 Checking the Operating Condition of a Physical Partition or Logical Domain

5.3.1 Checking the Operating Condition of a Physical Partition or Logical Domain


5.3.1 Checking the Operating Condition of a Physical Partition or Logical Domain
In the following execution example, the operating condition of the physical partition and logical domain is checked from the firmware.
  1. Log in to the XSCF shell.
  2. Execute the showpparstatus command to confirm the operating condition of the physical partition.
    In the following example, [PPAR Status] of PPAR-ID 00 displays "Running", which indicates that the physical partition is operating.
XSCF> showpparstatus -p 0
PPAR-ID PPAR Status
00 Running
  1. Execute the showdomainstatus command to confirm the operating condition of the logical domain.
    In the following example, [Status] of the logical domains of PPAR-ID 00 displays "Solaris running," which indicates that Oracle Solaris is operating.
XSCF> showdomainstatus -p 0
Logical Domain Name Status
primary Solaris running
guest0 Solaris running
guest1 Solaris running
iodom0 Solaris running
iodom1 Solaris running
sdiodomain Solaris running
sr-iodomain Solaris running