Skip to main content

Contents

  1. Preface
  2. Chapter 1 Before Starting Maintenance Work
    1.  1.1 Warning/Caution Indications
    2.  1.2 Labels/Tags
    3.  1.3 Safety Precautions
    4.  1.4 Precautions on Static Electricity
    5.  1.5 Other Precautions
    6.  1.6 Emergency Power Off
  3. Chapter 2 Understanding the System Components
    1.  2.1 Identifying the Names and Locations of Components
    2. Click 2.2 Checking the Memory Configuration Rules
    3. Click 2.3 Confirming the Functions of the Operation Panel
    4. Click 2.4 Checking the LED Indications
  4. Chapter 3 Types of Maintenance
    1.  3.1 Types of Maintenance Supported in the SPARC M10-1
    2.  3.2 Active Maintenance
    3.  3.3 System-stopped Maintenance (Inactive Maintenance)
  5. Chapter 4 Preparation and Precautions for Maintenance
    1. Click 4.1 Confirming the System Configuration
    2. Click 4.2 Troubleshooting
    3. Click 4.3 Maintenance Precautions
  6. Chapter 5 Preparations Required for Maintenance
    1.  5.1 Preparing Tools Required for Maintenance
    2.  5.2 Switching the Mode Switch to Service Mode
    3. Click 5.3 Checking the Operating Condition and Resource Usage Status
    4. Click 5.4 Enabling the Removal of an Internal Disk
    5. Click 5.5 Stopping the Entire System
    6. Click 5.6 Saving Setting Information and Configuration Information
    7.  5.7 Releasing a FRU from the System with the replacefru Command
    8. Click 5.8 Accessing a FRU
  7. Chapter 6 Understanding the Preparations for Restoring the System
    1. Click 6.1 Restoring the Chassis
    2.  6.2 Incorporating a FRU into the System with the replacefru Command
    3. Click 6.3 After Replacing the Motherboard Unit/PSU Backplane
    4.  6.4 Diagnosing a Replacement FRU
    5. Click 6.5 Restoring Setting Information and Configuration Information
    6.  6.6 Incorporating an Internal Disk
    7.  6.7 Checking the FRU Status after Maintenance
    8.  6.8 Returning the Mode Switch to Locked Mode
    9. Click 6.9 Starting the System
  8. Chapter 7 Maintenance Flow
    1.  7.1 Maintenance Workflow
    2. Click 7.2 FRU Replacement Workflow
    3. Click 7.3 FRU Installation Workflow
    4. Click 7.4 FRU Removal Workflow
  9. Chapter 8 Maintaining the PCI Express Cards
    1.  8.1 Before Maintaining a PCI Express Card
    2.  8.2 PCI Express Card Configuration
    3. Click 8.3 Removing a PCI Express Card
    4. Click 8.4 Installing a PCI Express Card
  10. Chapter 9 Maintaining the Internal Disks
    1.  9.1 Before Maintaining an Internal Disk
    2.  9.2 Configuration of the Internal Disks
    3.  9.3 Removing an Internal Disk
    4.  9.4 Installing an Internal Disk
  11. Chapter 10 Maintaining the HDD Backplane
    1.  10.1 Before Maintaining the HDD Backplane
    2.  10.2 HDD Backplane Location
    3. Click 10.3 Removing the HDD Backplane
    4. Click 10.4 Installing the HDD Backplane
  12. Chapter 11 Maintaining the Power Supply Units
    1.  11.1 Before Maintaining a Power Supply Unit
    2.  11.2 Configuration of the Power Supply Units
    3. Click 11.3 Removing a Power Supply Unit
    4. Click 11.4 Installing a Power Supply Unit
  13. Chapter 12 Maintaining the PSU Backplane
    1.  12.1 Before Maintaining the PSU Backplane
    2.  12.2 PSU Backplane Location
    3.  12.3 Precautions for Maintaining the PSU Backplane
    4. Click 12.4 Removing the PSU Backplane
    5. Click 12.5 Installing the PSU Backplane
  14. Chapter 13 Maintaining the Cable Kit
    1.  13.1 Before Maintaining the Cable Kit
    2.  13.2 Cable Kit Location
    3. Click 13.3 Removing the Cable Kit
    4. Click 13.4 Installing the Cable Kit
  15. Chapter 14 Maintaining the Operation Panel
    1.  14.1 Before Maintaining the Operation Panel
    2.  14.2 Operation Panel Location
    3. Click 14.3 Removing the Operation Panel
    4. Click 14.4 Installing the Operation Panel
  16. Chapter 15 Maintaining the Fan Units
    1.  15.1 Before Maintaining a Fan Unit
    2.  15.2 Configuration of the Fan Units
    3. Click 15.3 Removing a Fan Unit
    4. Click 15.4 Installing a Fan Unit
  17. Chapter 16 Maintaining the Motherboard Unit/Memory
    1.  16.1 Before Maintaining the Motherboard Unit/Memory
    2.  16.2 Motherboard Unit Location
    3.  16.3 Memory Locations
    4.  16.4 Precautions for Motherboard Unit Replacement
    5. Click 16.5 Removing the Motherboard Unit and Memory
    6. Click 16.6 Installing the Motherboard Unit and Memory
  18. Appendix A Component List
  19. Appendix B Component Specifications
    1.  B.1 Motherboard Unit
    2.  B.2 Power Supply Unit
    3.  B.3 Fan Unit
    4.  B.4 Internal Disk
    5.  B.5 PCI Express Card
    6.  B.6 Backplanes
    7.  B.7 Operation Panel
  20. Appendix C Oracle Solaris Troubleshooting Commands
    1.  C.1 iostat Command
    2.  C.2 prtdiag Command
    3.  C.3 prtconf Command
    4.  C.4 netstat Command
    5.  C.5 ping Command
    6.  C.6 ps Command
    7.  C.7 prstat Command
  21. Appendix D External Interface Specifications
    1. Click D.1 Serial Port
    2.  D.2 USB Port
    3.  D.3 SAS Port
    4.  D.4 RESET Switch
  22. Appendix E Removing the Lithium Battery
    1.  E.1 Location of the Lithium Battery
    2.  E.2 Removing the Lithium Battery

Preface


Preface
This document describes the maintenance procedures for the Oracle or Fujitsu SPARC M10-1.
This document can also be used as a disassembly procedure for disposal or recycling.
The maintenance work should be performed by service engineers and/or field engineers.
Fujitsu M10 is sold as SPARC M10 by Fujitsu in Japan.
Fujitsu M10 and SPARC M10 are identical products.
Audience
This document is intended for service engineers and field engineers who perform maintenance work on the system.
Related Documentation
All documents for your server are available online at the following locations.

The following table lists documents related to SPARC M10 Systems.
Documentation Related to the SPARC M10
Manual Names (*1)
Fujitsu M10/SPARC M10 Systems Product Notes
Fujitsu M10/SPARC M10 Systems Getting Started Guide (*2)
Fujitsu M10/SPARC M10 Systems Quick Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Important Legal and Safety Information (*2)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Security Guide
Software License Conditions for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10
Fujitsu SPARC Servers/SPARC Enterprise/PRIMEQUEST Common Installation Planning Manual
Fujitsu M10-1/SPARC M10-1 Installation Guide
Fujitsu M10-4/SPARC M10-4 Installation Guide
Fujitsu M10-4S/SPARC M10-4S Installation Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide
Fujitsu M10-1/SPARC M10-1 Service Manual
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
Crossbar Box for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
PCI Expansion Unit for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 RCIL User Guide (*3)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF MIB and Trap Lists
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Glossary
External USB-DVD Drive user guide
*1 The listed manuals are subject to change without notice.
*2 Printed manuals are provided with the product.
*3 This document applies specifically to the SPARC M12/M10 and FUJITSU ETERNUS disk storage system.
Notes on Safety
Read the following documents thoroughly before using or handling the SPARC M10 Systems.
  1. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Important Legal and Safety Information
  2. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide
Text Conventions
This manual uses the following fonts and symbols to express specific types of information.
Font/Symbol Meaning Example
AaBbCc123 What you type, when contrasted with on-screen computer output.
This font is used to indicate an example of command input.		 XSCF> adduser jsmith
AaBbCc123 The names of commands, files, and directories; on-screen computer output.
This font is used to indicate an example of command output in the frame.		 XSCF> showuser -P
User Name:    jsmith
Privileges:   useradm
              auditadm
Italic Indicates the name of a reference manual. See the Fujitsu M10-1/SPARC M10-1 Installation Guide.
" " Indicates the names of chapters, sections, items, buttons, or menus. See "Chapter 2 Network Connection."
Command Syntax in the Text
While the XSCF commands have a section number of (8) or (1), it is omitted from the text.
For details on the commands, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual.
Syntax of the Command-Line Interface (CLI)
The command syntax is as follows:
  1. A variable that requires the input of a value is in Italics.
  2. An optional element is enclosed in [].
  3. A group of options for an optional keyword is enclosed in [] and delimited by |.
Document Feedback
If you have any comments or requests regarding this document, please take a moment to share them with us. Along with the manual code, manual title, and page number, state your points specifically at one of the following websites:

Top of Page