Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu M10-1/SPARC M10-1 Service Manual >
  9. 5.5.2 Stopping the system from the operation panel

5.5.2 Stopping the system from the operation panel


5.5.2 Stopping the system from the operation panel
  1. Confirm that the mode switch on the operation panel is in Service mode.
  1. Press the power switch on the operation panel for 4 seconds or more.
    For details, see "2.3.2 Control function of the operation panel."
  1. Check that the POWER LED on the operation panel is off.
  1. Execute the showpparstatus command to confirm that the power to the physical partition is turned off.
    In the following example, [PPAR Status] of PPAR-ID 00 displays "Powered Off", which indicates that the power to the physical partition has been turned off.
XSCF> showpparstatus -a
PPAR-ID PPAR Status
00 Powered Off
  1. Execute the showdomainstatus command to confirm the operating condition of the logical domain.
    In the following example, [Status] of the logical domain displays "Solaris powering down," indicating the power-off processing of Oracle Solaris.
XSCF> showdomainstatus -p 0
Logical Domain Name Status
primary Solaris powering down