Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu M10-1/SPARC M10-1 Service Manual >
  9. 6.7 Checking the FRU Status after Maintenance

Contents

  1. Preface
  2. Chapter 1 Before Starting Maintenance Work
    1.  1.1 Warning/Caution Indications
    2.  1.2 Labels/Tags
    3.  1.3 Safety Precautions
    4.  1.4 Precautions on Static Electricity
    5.  1.5 Other Precautions
    6.  1.6 Emergency Power Off
  3. Chapter 2 Understanding the System Components
    1.  2.1 Identifying the Names and Locations of Components
    2. Click 2.2 Checking the Memory Configuration Rules
    3. Click 2.3 Confirming the Functions of the Operation Panel
    4. Click 2.4 Checking the LED Indications
  4. Chapter 3 Types of Maintenance
    1.  3.1 Types of Maintenance Supported in the SPARC M10-1
    2.  3.2 Active Maintenance
    3.  3.3 System-stopped Maintenance (Inactive Maintenance)
  5. Chapter 4 Preparation and Precautions for Maintenance
    1. Click 4.1 Confirming the System Configuration
    2. Click 4.2 Troubleshooting
    3. Click 4.3 Maintenance Precautions
  6. Chapter 5 Preparations Required for Maintenance
    1.  5.1 Preparing Tools Required for Maintenance
    2.  5.2 Switching the Mode Switch to Service Mode
    3. Click 5.3 Checking the Operating Condition and Resource Usage Status
    4. Click 5.4 Enabling the Removal of an Internal Disk
    5. Click 5.5 Stopping the Entire System
    6. Click 5.6 Saving Setting Information and Configuration Information
    7.  5.7 Releasing a FRU from the System with the replacefru Command
    8. Click 5.8 Accessing a FRU
  7. Chapter 6 Understanding the Preparations for Restoring the System
    1. Click 6.1 Restoring the Chassis
    2.  6.2 Incorporating a FRU into the System with the replacefru Command
    3. Click 6.3 After Replacing the Motherboard Unit/PSU Backplane
    4.  6.4 Diagnosing a Replacement FRU
    5. Click 6.5 Restoring Setting Information and Configuration Information
    6.  6.6 Incorporating an Internal Disk
    7.  6.7 Checking the FRU Status after Maintenance
    8.  6.8 Returning the Mode Switch to Locked Mode
    9. Click 6.9 Starting the System
  8. Chapter 7 Maintenance Flow
    1.  7.1 Maintenance Workflow
    2. Click 7.2 FRU Replacement Workflow
    3. Click 7.3 FRU Installation Workflow
    4. Click 7.4 FRU Removal Workflow
  9. Chapter 8 Maintaining the PCI Express Cards
    1.  8.1 Before Maintaining a PCI Express Card
    2.  8.2 PCI Express Card Configuration
    3. Click 8.3 Removing a PCI Express Card
    4. Click 8.4 Installing a PCI Express Card
  10. Chapter 9 Maintaining the Internal Disks
    1.  9.1 Before Maintaining an Internal Disk
    2.  9.2 Configuration of the Internal Disks
    3.  9.3 Removing an Internal Disk
    4.  9.4 Installing an Internal Disk
  11. Chapter 10 Maintaining the HDD Backplane
    1.  10.1 Before Maintaining the HDD Backplane
    2.  10.2 HDD Backplane Location
    3. Click 10.3 Removing the HDD Backplane
    4. Click 10.4 Installing the HDD Backplane
  12. Chapter 11 Maintaining the Power Supply Units
    1.  11.1 Before Maintaining a Power Supply Unit
    2.  11.2 Configuration of the Power Supply Units
    3. Click 11.3 Removing a Power Supply Unit
    4. Click 11.4 Installing a Power Supply Unit
  13. Chapter 12 Maintaining the PSU Backplane
    1.  12.1 Before Maintaining the PSU Backplane
    2.  12.2 PSU Backplane Location
    3.  12.3 Precautions for Maintaining the PSU Backplane
    4. Click 12.4 Removing the PSU Backplane
    5. Click 12.5 Installing the PSU Backplane
  14. Chapter 13 Maintaining the Cable Kit
    1.  13.1 Before Maintaining the Cable Kit
    2.  13.2 Cable Kit Location
    3. Click 13.3 Removing the Cable Kit
    4. Click 13.4 Installing the Cable Kit
  15. Chapter 14 Maintaining the Operation Panel
    1.  14.1 Before Maintaining the Operation Panel
    2.  14.2 Operation Panel Location
    3. Click 14.3 Removing the Operation Panel
    4. Click 14.4 Installing the Operation Panel
  16. Chapter 15 Maintaining the Fan Units
    1.  15.1 Before Maintaining a Fan Unit
    2.  15.2 Configuration of the Fan Units
    3. Click 15.3 Removing a Fan Unit
    4. Click 15.4 Installing a Fan Unit
  17. Chapter 16 Maintaining the Motherboard Unit/Memory
    1.  16.1 Before Maintaining the Motherboard Unit/Memory
    2.  16.2 Motherboard Unit Location
    3.  16.3 Memory Locations
    4.  16.4 Precautions for Motherboard Unit Replacement
    5. Click 16.5 Removing the Motherboard Unit and Memory
    6. Click 16.6 Installing the Motherboard Unit and Memory
  18. Appendix A Component List
  19. Appendix B Component Specifications
    1.  B.1 Motherboard Unit
    2.  B.2 Power Supply Unit
    3.  B.3 Fan Unit
    4.  B.4 Internal Disk
    5.  B.5 PCI Express Card
    6.  B.6 Backplanes
    7.  B.7 Operation Panel
  20. Appendix C Oracle Solaris Troubleshooting Commands
    1.  C.1 iostat Command
    2.  C.2 prtdiag Command
    3.  C.3 prtconf Command
    4.  C.4 netstat Command
    5.  C.5 ping Command
    6.  C.6 ps Command
    7.  C.7 prstat Command
  21. Appendix D External Interface Specifications
    1. Click D.1 Serial Port
    2.  D.2 USB Port
    3.  D.3 SAS Port
    4.  D.4 RESET Switch
  22. Appendix E Removing the Lithium Battery
    1.  E.1 Location of the Lithium Battery
    2.  E.2 Removing the Lithium Battery

6.7 Checking the FRU Status after Maintenance


6.7 Checking the FRU Status after Maintenance
This section describes the procedure for confirming that the FRU is operating normally after the completion of maintenance.
  1. Log in to the XSCF shell.
  2. Execute the showstatus command.
    Nothing is displayed in the normal state.
XSCF> showstatus
  1. Execute the showlogs error command.
    Confirm that no new errors are displayed.
XSCF> showlogs error
  1. Execute the showhardconf command.
    Confirm that no asterisk (*) is displayed in front of any FRU.
XSCF> showhardconf
SPARC M10-1;
+ Serial:2101151008A; Operator_Panel_Switch:Locked;
+ System_Power:Off; System_Phase:Cabinet Power Off;
Partition#0 PPAR_Status:Powered Off;
MBU Status:Normal; Ver:2004h; Serial:USDA-P00007 ;
+ FRU-Part-Number:CA20366-B10X 002AB/LGA-MBU -01 ;
+ Power_Supply_System: Dual ;
+ Memory_Size:32 GB; Type: A ; (*1)
CPU#0 Status:Normal; Ver:4142h; Serial: 00010448;
+ Freq:2.800 GHz; Type:0x10; (*2)
+ Core:16; Strand:2; (*3)
MEM#00A Status:Normal;
+ Code:ce8002M393B5270DH0-YH9 0000-85A8EFD9;
+ Type:01; Size:4 GB;
------------------------Omitted------------------------

FANU#0 Status:Normal;
FANU#1 Status:Normal;
FANU#2 Status:Normal;
FANU#3 Status:Normal;
FANU#4 Status:Normal;
------------------------Omitted------------------------
*1 For an MBU on which the SPARC64 X+ processor is mounted, "Type: B" is displayed. For an MBU on which the SPARC64 X processor is mounted, "Type: A" is displayed.
*2 If the SPARC64 X+ processor is mounted, "2.800 GHz; Type:0x20", "3.200 GHz; Type:0x20", or "3.700 GHz; Type:0x20" is displayed.
If the SPARC64 X processor is mounted, "2.800 GHz; Type:0x10" is displayed.
*3 If the SPARC64 X+ (3.7 GHz (8 cores)) processor is mounted, "Core:8" is displayed.

Top of Page