Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu M10-1/SPARC M10-1 Service Manual >
  9. 6.9.2 Starting the system from the operation panel

6.9.2 Starting the system from the operation panel


6.9.2 Starting the system from the operation panel
  1. Check that the XSCF STANDBY LED on the operation panel is on.
  2. Press the power switch on the operation panel for 1 second or more (less than 4 seconds).
    For details, see "2.3.2 Control function of the operation panel."
  3. Confirm that the POWER LED on the operation panel is on.
  4. Log in to the XSCF shell.
  5. Execute the showpparstatus command to confirm that the power to the physical partition is turned on.
XSCF> showpparstatus -p 0
PPAR-ID PPAR Status
00    Running
  1. Execute the fmadm faulty command on the logical domains where an error is detected to confirm that no errors remain.
# fmadm faulty
  1. If any error remains, execute the fmadm repaired command to clear the error.