Skip to main content

Contents

  1. Preface
  2. Chapter 1 Software Requirements
    1. Click XCP/Oracle Solaris and Required SRUs/Patches
    2.  How to Obtain XCP and Oracle Solaris SRUs/Patches/Oracle VM Server for SPARC
    3.  Web Browser
    4.  Software Supporting Remote Storage
    5.  Obtaining the SAS-2 Integrated RAID Configuration Utility
    6.  Existing XCP Firmware Versions and Support Information
  3. Chapter 2 XCP 2430-Related Information
    1.  Latest Information on XCP 2430
    2. Click Notes and Restrictions
    3.  XCP 2430 Problems and Workarounds
  4. Chapter 3 Information on Software
    1. Click Notes and Restrictions
    2. Click Problems With XCP and Workarounds
    3. Click Problems With Oracle Solaris and Workarounds
  5. Chapter 4 Information on SPARC M10-1 Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  6. Chapter 5 Information on SPARC M10-4 Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  7. Chapter 6 Information on SPARC M10-4S Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  8. Chapter 7 Information on the PCI Expansion Unit
    1.  PCI Expansion Unit Firmware Versions and Support Information
    2. Click Direct I/O Function for the PCI Expansion Unit
    3. Click Problems With the PCI Expansion Unit and Workarounds
  9. Chapter 8 Information on SPARC M10 Manuals

Preface


Preface
This document describes the latest information about XSCF Control Package (XCP) and the important and latest information regarding hardware, firmware, software, and documents of SPARC M10 Systems.
Note - If a newer version of XCP than the version supported in this document is released, only the document supporting the latest version of XCP is updated. In addition to reading this document, visit the following websites to see the document supporting the latest version of XCP. Check the contents and usage to confirm whether there are any corrections in the documents related to the XCP version that you use.

▪ Global site

https://www.fujitsu.com/global/products/computing/servers/unix/sparc/downloads/manuals/
▪ Japanese site

https://www.fujitsu.com/jp/products/computing/servers/unix/sparc/downloads/manual/
Fujitsu M10 is sold as SPARC M10 Systems by Fujitsu in Japan.
Fujitsu M10 and SPARC M10 Systems are identical products.
Audience
This document is designed for system administrators with advanced knowledge of a computer network and Oracle Solaris.
Information on Firmware
This is information for customers of Fujitsu.
Obtain the firmware for your server from the following sources.
▪ Global site

Please contact your local support provider to obtain the files required for a firmware update.

▪ Japanese site

Customers who subscribed to SupportDesk can obtain the firmware from the SupportDesk-Web.
The following files are provided.
▪ Firmware program file (XSCF Control Package (XCP) file)

▪ XSCF extended MIB (XSCF-SP-MIB) definition file
Note - XSCF Control Package (XCP): XCP is a packaged control program of the hardware that configures SPARC M10 Systems. An XCP file includes the XSCF firmware, OpenBoot PROM firmware, Power-On Self-Test firmware, and Hypervisor firmware.
How to Use This Document
This document supports all models of SPARC M10 Systems. Depending on the server you use, read the related items listed in the following table.
The information about firmware and software described in Chapter 1, Chapter 2, and Chapter 3 is common to all models. Some of the information are only related to a specific model. In such a case, the applicable model name is indicated.

Information about hardware devices is provided separately in Chapter 4, Chapter 5, and Chapter 6 for each model. The contents common to all models are described in all chapters describing hardware. Therefore, when you check the hardware information about multiple models, you will find that some contents are duplicated in some chapters.

Check the information about the PC expansion unit (Chapter 7) when installing the PCI expansion unit.

Descriptions of document revisions are provided (Chapter 8) for each document. Check whether the contents of your document have been revised.
Related Documentation
All documents for your server are available online at the following locations.

The following table lists documents related to SPARC M10 Systems.
Documentation Related to the SPARC M10
Manual Names (*1)
Fujitsu M10/SPARC M10 Systems Product Notes
Fujitsu M10/SPARC M10 Systems Getting Started Guide (*2)
Fujitsu M10/SPARC M10 Systems Quick Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Important Legal and Safety Information (*2)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Security Guide
Software License Conditions for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10
Fujitsu SPARC Servers/SPARC Enterprise/PRIMEQUEST Common Installation Planning Manual
Fujitsu M10-1/SPARC M10-1 Installation Guide
Fujitsu M10-4/SPARC M10-4 Installation Guide
Fujitsu M10-4S/SPARC M10-4S Installation Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide
Fujitsu M10-1/SPARC M10-1 Service Manual
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
Crossbar Box for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
PCI Expansion Unit for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 RCIL User Guide (*3)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF MIB and Trap Lists
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Glossary
External USB-DVD Drive user guide
*1 The listed manuals are subject to change without notice.
*2 Printed manuals are provided with the product.
*3 This document applies specifically to the SPARC M12/M10 and FUJITSU ETERNUS disk storage system.
Notes on Safety
Read the following documents thoroughly before using or handling the SPARC M10 Systems.
  1. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Important Legal and Safety Information
  2. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide
Text Conventions
This manual uses the following fonts and symbols to express specific types of information.
Font/Symbol Meaning Example
AaBbCc123 What you type, when contrasted with on-screen computer output.
This font is used to indicate an example of command input.		 XSCF> adduser jsmith
AaBbCc123 The names of commands, files, and directories; on-screen computer output.
This font is used to indicate an example of command output in the frame.		 XSCF> showuser -P
User Name:    jsmith
Privileges:   useradm
              auditadm
Italic Indicates the name of a reference manual. See the Fujitsu M10-1/SPARC M10-1 Installation Guide.
" " Indicates the names of chapters, sections, items, buttons, or menus. See "Chapter 2 Network Connection."
Command Syntax in the Text
While the XSCF commands have a section number of (8) or (1), it is omitted from the text.
For details on the commands, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual.
Syntax of the Command-Line Interface (CLI)
The command syntax is as follows:
  1. A variable that requires the input of a value is in Italics.
  2. An optional element is enclosed in [].
  3. A group of options for an optional keyword is enclosed in [] and delimited by |.
Document Feedback
If you have any comments or requests regarding this document, please take a moment to share them with us. Along with the manual code, manual title, and page number, state your points specifically at one of the following websites:

Top of Page