Skip to main content

Contents

  1. Preface
  2. Chapter 1 Software Requirements
    1. Click XCP/Oracle Solaris and Required SRUs/Patches
    2.  How to Obtain XCP and Oracle Solaris SRUs/Patches/Oracle VM Server for SPARC
    3.  Web Browser
    4.  Software Supporting Remote Storage
    5.  Obtaining the SAS-2 Integrated RAID Configuration Utility
    6.  Existing XCP Firmware Versions and Support Information
  3. Chapter 2 XCP 2430-Related Information
    1.  Latest Information on XCP 2430
    2. Click Notes and Restrictions
    3.  XCP 2430 Problems and Workarounds
  4. Chapter 3 Information on Software
    1. Click Notes and Restrictions
    2. Click Problems With XCP and Workarounds
    3. Click Problems With Oracle Solaris and Workarounds
  5. Chapter 4 Information on SPARC M10-1 Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  6. Chapter 5 Information on SPARC M10-4 Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  7. Chapter 6 Information on SPARC M10-4S Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  8. Chapter 7 Information on the PCI Expansion Unit
    1.  PCI Expansion Unit Firmware Versions and Support Information
    2. Click Direct I/O Function for the PCI Expansion Unit
    3. Click Problems With the PCI Expansion Unit and Workarounds
  9. Chapter 8 Information on SPARC M10 Manuals

Notes and Restrictions on XSCF Web


Notes and Restrictions on XSCF Web
Notes
  1. Common to browsers
  1. - Suppose that you select [XSCF] - [Setting] - [CoD Reservation] menu on XSCF Web and change the setting value by clicking the [Reserve CoD Resources] button on the [PPAR Usage and Reservation] table. If you specify a value smaller than the current setting value, the following warning message dialog box appears for confirmation that you have entered the correct value.
PROC Permits assigned is less than current setting. Continue?
   Click the [OK] button to continue the setting, or click the [Cancel] button to cancel the setting.
  1. - XCP 2090 and later supports operations from the [PPAR Operation] - [PPAR Parameter] menu to display/set the OpenBoot PROM environment variables of a physical partition (PPAR). In XCP 2080 or earlier, execute the XSCF showpparparam(8) or setpparparam(8) command to display/set the OpenBoot PROM environment variables of a PPAR.
  1. - XCP 2080 and later supports operations from the [Logical Tree] menu on the [Logical] bar to display resource information regarding the CPUs and memory belonging to a PPAR. In XCP 2070 or earlier, execute the XSCF showpparinfo(8) command to display resource information regarding the CPUs and memory belonging to a PPAR.
  1. Internet Explorer
    If you use an XSCF Web version from XCP 2221 or earlier with Internet Explorer 10 or 11, you may see distorted screen layouts, such as disordered tables or superimposed characters. If you see a distorted XSCF Web screen layout in the above environment, use Firefox.
    However, this problem does not affect system operation.
  1. Google Chrome
    When using XSCF Web in a Google Chrome environment, if you select any menu under [Logs] and click the [Search] button immediately after XSCF login, a pop-up window may not appear. In this case, access another menu under [Logs], and then try again to display it.
  1. Microsoft Edge
    If you use XSCF Web in a Microsoft Edge environment, the following problems may occur. Note that they do not occur in Internet Explorer Mode.
    - Following a session timeout as a result of inactivity on XSCF Web, if you select any menu under [Logs] and click the [Search] button immediately after logging in to the XSCF again, a pop-up window may not appear. In this case, access another menu under [Logs], and then try again to display it. If the pop-up window still does not appear, close the browser and then try again to display it.

    - A table frame may not be displayed on [Status] - [System Overview] from the menu, or on the [Log Monitor] or other monitoring screen. In this case, close the browser and then try again to display it.

    - A message displayed on the [Logs] - [Console Log] screen, [Logs] - [IPL Message Log] screen, or other screen may overflow the table frame. In this case, close the browser and then try displaying it again.
  1. Firefox
    If you use XSCF Web in a Firefox environment, the browser may prompt you to save the login ID and password when you log in to the XSCF. In this case, do not save the login ID and password. If you save the login ID and password, the saved data may be displayed on LDAP, SMTP, and REMCS web pages.
Note - Remote Customer Support System (REMCS) is supported only for SPARC M10 systems sold within Japan by Fujitsu.
  1. Configure either of the following settings to disable the login ID/password save function of the browser:
    - Disable the login ID/password save function throughout the browser. Select [Tools] - [Options] - [Security] tab, and uncheck [Remember passwords for sites] in [Passwords].

    - Specify the site as an exception to login ID and password saving. Select [Tools] - [Options] - [Security] tab, and check [Remember passwords for sites] in [Passwords]. Then, click the [Never Remember Password for This Site] button in the dialog box that appears for ID and password saving when you log in to the XSCF. This registers the address of the XSCF in the [Exceptions] list for ID and password saving, and the dialog box for ID and password saving does not appear at subsequent logins to the XSCF.
Restrictions
  1. Common to browsers
    There are currently no known restrictions.
  1. Internet Explorer
    If you use Internet Explorer 8 in a Windows 7 environment, built-in Administrator accounts cannot be used.
  1. Firefox
    There are currently no known restrictions.

Top of Page