Existing XCP Firmware Versions and Support Information
Existing XCP Firmware Versions and Support Information
The following table lists the XCP firmware versions that have been released for the SPARC M10 systems, as well as the main support and update information for each version.
| XCP Version | Main Support Information | CMU Version |
|---|---|---|
| XCP 2430 | Improvement of XCP firmware defects | 02.41.0001 |
| XCP 2420 | - Improvement of XCP firmware defects - End of support for DSA host keys and DSA user public keys for SSH connection - Change of the default encryption protocol for the SNMPv3 agent to Advanced Encryption Standard (AES) |
02.41.0001 |
| XCP 2411 | Improvement of XCP firmware defects | 02.41.0001 |
| XCP 2410 | - Improvement of XCP firmware defects - Addition of Microsoft Edge as a supported Web browser |
02.40.0000 |
| XCP 2400 | - Improvement of XCP firmware defects - Security fixes |
02.40.0000 |
| XCP 2362 | Improvement of XCP firmware defects | 02.36.0002 |
| XCP 2361 | Security fixes | 02.36.0000 |
| XCP 2360 | Addition of error log entries for power supply unit (PSU) failures | 02.36.0000 |
| XCP 2353 | Addition of Java support information for remote storage | 02.35.0002 |
| XCP 2352 | - Security fixes - Support of the sethwproperty(8) and showhwproperty(8) commands |
02.35.0002 |
| XCP 2351 | Security fixes | 02.35.0001 |
| XCP 2350 | Support of the function for checking the time before starting a physical partition | 02.35.0000 |
| XCP 2340 | Improvement when the OpenBoot PROM security mode is enabled | 02.34.0000 |
| XCP 2332 | Improvement of XCP firmware defects | 02.33.0000 |
| XCP 2330 | Support for CPU Activation Interim Permit in the SPARC M10-4S | 02.33.0000 |
| XCP 2322 | Improvement of XCP firmware defects | 02.32.0002 |
| XCP 2321 | Improvement of XCP firmware defects | 02.32.0001 |
| XCP 2320 | - Support for CPU Activation Interim Permit |
02.32.0000 |
- Support for the verified boot for the network boot |
||
- Improvement of logs when a file system error occurs |
||
| XCP 2290 | - Support for the SPARC64 X+ processor (2.8 GHz) in the SPARC M10-1 - Support for enabling/disabling the IPMI service when using the remote power management function - Support for the deferred dump function |
02.29.0000 |
| XCP 2280 | - Support for live migration of Oracle Solaris kernel zones |
02.28.0000 |
- Support for the verified boot of the guest domain |
||
| XCP 2271 | Support for Virtual SCSI Host Bus Adapter (vHBA) function | 02.27.0001 |
| XCP 2260 | - Support for remote storage - Support for addition/deletion specification when configuring CPU Activation - Support for the function to reduce fan noise - Support for performance register access control feature provided by Oracle VM Server for SPARC 3.2 |
02.26.0000 |
| XCP 2250 | - Support for SPARC64 X+ processor (3.7 GHz) in SPARC M10-1/M10-4 - Support for the verified boot |
02.25.0000 |
| XCP 2240 | - Support for the DNS round-robin for the host name of the NTP server - Support for 1984 LDC endpoints per guest domain - Support for Dynamic PCIe bus assignment provided with Oracle VM Server for SPARC 3.2 |
02.24.0000 |
| XCP 2232 | Security fixes | 02.23.0001 |
| XCP 2231 | Security fixes | 02.23.0001 |
| XCP 2230 | - Support for Internet Explorer 10 and 11 in XSCF Web - Support for Extensible Firmware Interface GUID Partition Table (EFI GPT) labels - Support for recovery mode provided by Oracle VM Server for SPARC 3.1 - Support for the function for dynamically reconfiguring PCIe endpoint devices through combination with Oracle VM Server for SPARC - Support for Oracle Solaris kernel zones |
02.23.0000 |
| XCP 2221 | Improvement of XCP firmware defects | 02.22.0000 |
| XCP 2220 | - Support of the dynamic reconfiguration (DR) function of the system board in a physical partition (PPAR) - Support for XSCF startup mode function (SPARC M10-1) |
02.22.0000 |
| XCP 2210 | - Support for SPARC64 X+ processors - Support for CPU operational mode, which specifies how a CPU should operate - Enable the factory default configuration for the feature of dynamic reconfiguration of physical partitions (PPAR DR). - The LDAP, Active Directory, LDAP over SSL features have been supported for the XSCF user account - The SR-IOV feature in combination with Oracle VM Server for SPARC is supported - The "no-io" feature when configuring physical partitions is supported |
02.21.0000 |
| XCP 2092 | Improvement of XCP firmware defects | 02.09.0000 |
| XCP 2091 | Improvement of XCP firmware defects | 02.09.0000 |
| XCP 2090 | - Support of 64 GB memory - Support of multiple specifications of the port and community string for the Trap host of the SNMP agent function - Support for automatic XCP firmware version synchronization between chassis when maintenance is done in the off state of the input power supply - Support for the XSCF Web menu used to display/set the OpenBoot PROM environment variables of a physical partition |
02.09.0000 |
| XCP 2080 | - Support of the Auto Service Request (ASR) function - Support for the XSCF Web menu used to display physical partition resource information |
02.08.0000 |
| XCP 2070 | Improvement of XCP firmware defects | 02.07.0000 |
| XCP 2052 | - Support of the AES algorithm encryption function for the SNMP agent function - Support of different memories in the chassis |
02.05.0002 |
| XCP 2051 | Improvement of XCP firmware defects | 02.05.0001 |
| XCP 2050 | Support of the direct I/O function for the PCI expansion unit (SPARC M10-4S) | 02.05.0000 |
| XCP 2044 | Support of the direct I/O function for the PCI expansion unit (SPARC M10-1/M10-4) | 02.04.0004 |
| XCP 2042 | Support of the crossbar box (configuration of up to 16 BB) | 02.04.0001 |
| XCP 2041 | Support of the PCI expansion unit | 02.04.0001 |
| XCP 2032 | Improvements related to the Oracle VM Server for SPARC software | 02.03.0001 |
| XCP 2031 | Support of SPARC M10-4S (configuration of up to 4 BB) | 02.03.0001 |
| XCP 2013 | Improvement of XCP firmware defects | 02.01.0003 |
| XCP 2012 | Support of SPARC M10-1/M10-4 | 02.01.0002 |
| Note - The XSCF firmware and CMU firmware versions in XCP can be checked with the version -c xcp -v command. When the CMU firmware version is updated, power off the physical partition and then power it on again to complete the CMU firmware update. For details on the firmware update, see "Chapter 16 Updating the XCP Firmware" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide. |
| Note - The CMU firmware version may differ with the XCP version. For example, in XCP 2042, the XSCF version is 02.04.0002, whereas the CMU version is 02.04.0001. |
< Previous Page | Next Page >