Skip to main content

Latest Information on XCP 2430


Latest Information on XCP 2430
This section describes major changes in XCP 2430.
This XCP version modifies XSCF firmware.
Note - After the firmware update completes, power-off/power-on of the physical partition may be required.
For details on the firmware update, see "Chapter 16 Updating the XCP Firmware" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.
XCP firmware defects were improved (RTIF2-211015-004, RTIF2-230919-002, RTIF2-230919-004, RTIF2-230919-006).