Skip to main content

Problems Resolved in XCP 2400


Problems Resolved in XCP 2400
The following table lists the problems resolved in XCP 2400.
Table 3-15  Problems Resolved in XCP 2400
RTI No. RTIF2-210506-001
Model SPARC M10-1, SPARC M10-4, SPARC M10-4S
Description Security fixes.
(CVE-2020-1968, CVE-2018-0737, CVE-2018-0739, CVE-2017-3735)
For details, see the Oracle website relating to the following:
Critical Patch Updates
Workaround Update the XCP firmware to XCP 2400 or later.
RTI No. RTIF2-210506-002
Model SPARC M10-1, SPARC M10-4, SPARC M10-4S
Description Security fixes.
(CVE-2016-4429, CVE-2017-16931, CVE-2017-5461, CVE-2018-7183, CVE-2020-11868)
For details, see the Oracle website relating to the following:
Critical Patch Updates
Workaround Update the XCP firmware to XCP 2400 or later.
RTI No. RTIF2-210209-001
Model SPARC M10-1, SPARC M10-4, SPARC M10-4S
Description In some very rare cases, any of the following may occur when XSCF Web is used.
(1) The "SCF panic detected" error is detected and the XSCF is rebooted.

(2) The physical partition cannot be powered on, powered off, or restarted.

(3) Nothing can be set or displayed with XSCF shell commands or XSCF Web.
Workaround There is no effective workaround.
[How to restore]
Perform the following procedure for (2) or (3) in [Description].
1. If Oracle Solaris is running, shut down every Oracle Solaris instance.

2. Confirm that Oracle Solaris has been shut down, and then turn off and on (AC OFF/ON) the input power of the system.
RTI No. RTIF2-210204-001
Model SPARC M10-4S
Description Register values may be corrupted at the failure of dynamic reconfiguration of a physical partition. This may cause a logical domain to panic.
Workaround There is no effective workaround.
RTI No. RTIF2-210204-003
Model SPARC M10-4S
Description Rebooting multiple logical domains simultaneously during dynamic reconfiguration of the physical partition may corrupt register values to cause Hypervisor to abort.
Workaround There is no effective workaround.
RTI No. RTIF2-210203-001
Model SPARC M10-4S
Description PPAR DR may fail because Hypervisor does not report its completion to the XSCF.
Workaround There is no effective workaround.
RTI No. RTIF2-200528-003
Model SPARC M10-4S
Description A logical domain may panic with the following message when dynamic reconfiguration of the physical partition with the deleteboard(8) command is performed.

send_mondo_set: unexpected hypervisor error 0x2 while sending a mondo to cpuid(s): 0x17
panic[cpu29]/thread=c400630b7740: send_mondo_set: unexpected hypervisor error
Workaround There is no effective workaround.