Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12 Product Notes for XCP 4010 - 4040 / XCP 3021 - XCP 3130 >
  9. Problems Resolved in Version 1330 of the PCI Expansion Unit Firmware

Contents

  1. Preface
  2. Chapter 1 Latest Information
    1.  Latest Information
    2.  Revision Information
  3. Chapter 2 Software Requirements
    1. Click Supported Firmware and Oracle Solaris Versions
    2.  Web Browser
    3.  Software Supporting Remote Storage
    4.  XCP and Oracle Solaris Version Supporting Power Aware Dispatcher Function
    5.  How to Obtain XCP and Oracle Solaris SRU/Patch/Oracle VM Server for SPARC
    6. Click Notes on Memory
    7. Click Notes on Mixing Different Hardware
    8.  Obtaining the SAS-2 Integrated RAID Configuration Utility
  4. Chapter 3 Information on XCP
    1. Click Latest Information on XCP
    2.  XCP Firmware Versions and Support Information
    3. Click Notes and Restrictions
    4. Click Problems With XCP and Workarounds
  5. Chapter 4 Information on Oracle Solaris
    1. Click Notes and Restrictions
    2. Click Problems With Oracle Solaris and Workarounds
  6. Chapter 5 Information on SPARC M12 System Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  7. Chapter 6 Information on the PCI Expansion Unit
    1.  PCI Expansion Unit Firmware Versions and Support Information
    2. Click Direct I/O Function for the PCI Expansion Unit
    3. Click Problems With the PCI Expansion Unit and Workarounds
  8. Chapter 7 Information on SPARC M12 Manuals

Problems Resolved in Version 1330 of the PCI Expansion Unit Firmware


Problems Resolved in Version 1330 of the PCI Expansion Unit Firmware
The following table lists the problems resolved in version 1330 of the PCI expansion unit firmware.
Table 6-3  Problems Resolved in Version 1330 of the PCI Expansion Unit Firmware
RTI No. RTIF2-190902-001
Model SPARC M12-1, SPARC M12-2, SPARC M12-2S
Description You cannot use the following link cables (optical) when PCI expansion unit firmware 1310 or earlier is being used:
Part number: 8204008 and CA66117-1002
These numbers are found on labels on the link cables (optical).
If one of these cables is connected when the PCI expansion unit is powered on, the following error occurs:
PCI Express lane is degraded
PCI Express link speed is degraded
Workaround To use link cables (optical) with PCI expansion unit firmware 1310 or earlier, make sure to use the ones with both "7061047" and "CA66053-1002" printed on their labels. With PCI expansion unit firmware 1330 or later, you can use all link cables.
RTI No. RTIF2-190716-003
Model SPARC M12-1, SPARC M12-2, SPARC M12-2S
Description The CHECK LED of the PCI expansion unit does not go on when the input power to the power supply unit (PSU) of the PCI expansion unit is turned off. Likewise, if an error occurs in the primary circuit, the LED does not go on.
Workaround There is no effective workaround.

Top of Page