Skip to main content

XCP Firmware Versions and Support Information


XCP Firmware Versions and Support Information
The following table lists information on the XCP firmware versions and CMU firmware versions released for SPARC M12 systems.
Table 3-1  XCP Firmware Versions and Support Information
XCP Version Main Support Information CMU Version (*1)(*2)
XCP 3110  Correction of XCP firmware problems (RTIF2-211015-001) 03.10.0000
XCP 3100 Correction of XCP firmware problems (RTIF2-200528-001, RTIF2-201109-028, RTIF2-201109-029, RTIF2-210203-002, RTIF2-210204-002, RTIF2-210204-004, RTIF2-210506-003) 03.10.0000
XCP 3090 Correction of XCP firmware problems (RTIF2-200423-001, RTIF2-200515-001, RTIF2-200518-001, RTIF2-200518-003, RTIF2-200528-002, RTIF2-200805-001) 03.09.0000
XCP 3080 Correction of XCP firmware problems (RTIF2-191223-001) 03.07.0000
XCP 3071 Security fixes (RTIF2-190903-002) 03.07.0000
XCP 3070
- Support of crossbar cables (electrical) for direct connections between chassis in configurations up to 4BB

- Correction of XCP firmware problems (RTIF2-190716-002, RTIF2-201106-001)
03.07.0000
XCP 3060 Correction of XCP firmware problems (RTIF2-210118-019, RTIF2-181211-001, RTIF2-181211-002, RTIF2-181211-003) 03.05.0002
XCP 3053 Correction of XCP firmware problems (RTIF2-180914-001, RTIF2-180926-001) 03.05.0002
XCP 3052
- Security fixes (RTIF2-180704-002)

- Support of the sethwproperty(8) and showhwproperty(8) commands
03.05.0002
XCP 3051 Security fixes (RTIF2-180403-002) 03.05.0001
XCP 3050
- Correction of XCP firmware problems (RTIF2-210118-012, RTIF2-210118-013, RTIF2-210118-014, RTIF2-210118-015, RTIF2-210118-016, RTIF2-210118-017, RTIF2-210118-018)

- Support of the showdateinfo(8) command for checking the time before a physical partition starts

- Correction of a problem related to 64 GB DIMMs (RTIF2-180214-001)

- Security fixes (RTIF2-180525-002)
03.05.0000
XCP 3040
- Correction of XCP firmware problems (RTIF2-201106-002, RTIF2-201106-003, RTIF2-201106-005, RTIF2-201106-006, RTIF2-210118-009, RTIF2-210118-010, RTIF2-210118-011, RTIF2-210209-008)

- The Power Aware Dispatcher (PAD) function support

- The maximum number of connected PCI expansion units has increased to eight (SPARC M12-2/M12-2S).
03.04.0000
XCP 3030 
- SPARC M12-1 supported

- Correction of XCP firmware problems (RTIF2-210118-003, RTIF2-210118-004, RTIF2-210118-005, RTIF2-210118-006, RTIF2-210118-007, RTIF2-210118-008)

- Security fixes (RTIF2-171013-002)
03.03.0000
XCP 3022 Correction of XCP firmware problems (RTIF2-170517-001) 03.02.0002
XCP 3021 SPARC M12 support 03.02.0000
*1 The version -c xcp -v command can check the XSCF firmware and CMU firmware versions currently applied to the system.

*2 After the firmware update completes, power-off/power-on of the physical partition may be required.
When the CMU firmware version is updated, power off the physical partition and then power it on again to complete the CMU firmware update. For details on the firmware update, see "Chapter 16  Updating the XCP Firmware" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.