Skip to main content

Contents

  1. Preface
  2. Chapter 1 Latest Information
    1.  Latest Information
    2.  Revision Information
  3. Chapter 2 Software Requirements
    1. Click Supported Firmware and Oracle Solaris Versions
    2.  Web Browser
    3.  Software Supporting Remote Storage
    4.  XCP and Oracle Solaris Version Supporting Power Aware Dispatcher Function
    5.  How to Obtain XCP and Oracle Solaris SRU/Patch/Oracle VM Server for SPARC
    6. Click Notes on Memory
    7. Click Notes on Mixing Different Hardware
    8.  Obtaining the SAS-2 Integrated RAID Configuration Utility
  4. Chapter 3 Information on XCP
    1. Click Latest Information on XCP
    2.  XCP Firmware Versions and Support Information
    3. Click Notes and Restrictions
    4. Click Problems With XCP and Workarounds
  5. Chapter 4 Information on Oracle Solaris
    1. Click Notes and Restrictions
    2. Click Problems With Oracle Solaris and Workarounds
  6. Chapter 5 Information on SPARC M12 System Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  7. Chapter 6 Information on the PCI Expansion Unit
    1.  PCI Expansion Unit Firmware Versions and Support Information
    2. Click Direct I/O Function for the PCI Expansion Unit
    3. Click Problems With the PCI Expansion Unit and Workarounds
  8. Chapter 7 Information on SPARC M12 Manuals

Latest Information on XCP 3130


Latest Information on XCP 3130
This section describes major changes in XCP 3130.
This XCP version modifies XSCF firmware.
Note - After the firmware update completes, power-off/power-on of the physical partition may be required.
For details on the firmware update, see "Chapter 16 Updating the XCP Firmware" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.
XCP firmware defects were improved (RTIF2-211015-003, RTIF2-230919-001, RTIF2-230919-003, RTIF2-230919-005).

Top of Page