Skip to main content

Contents

  1. Preface
  2. Chapter 1 Latest Information
    1.  Latest Information
    2.  Revision Information
  3. Chapter 2 Software Requirements
    1. Click Supported Firmware and Oracle Solaris Versions
    2.  Web Browser
    3.  Software Supporting Remote Storage
    4.  XCP and Oracle Solaris Version Supporting Power Aware Dispatcher Function
    5.  How to Obtain XCP and Oracle Solaris SRU/Patch/Oracle VM Server for SPARC
    6. Click Notes on Memory
    7. Click Notes on Mixing Different Hardware
    8.  Obtaining the SAS-2 Integrated RAID Configuration Utility
  4. Chapter 3 Information on XCP
    1. Click Latest Information on XCP
    2.  XCP Firmware Versions and Support Information
    3. Click Notes and Restrictions
    4. Click Problems With XCP and Workarounds
  5. Chapter 4 Information on Oracle Solaris
    1. Click Notes and Restrictions
    2. Click Problems With Oracle Solaris and Workarounds
  6. Chapter 5 Information on SPARC M12 System Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  7. Chapter 6 Information on the PCI Expansion Unit
    1.  PCI Expansion Unit Firmware Versions and Support Information
    2. Click Direct I/O Function for the PCI Expansion Unit
    3. Click Problems With the PCI Expansion Unit and Workarounds
  8. Chapter 7 Information on SPARC M12 Manuals

Notes on Active Directory


Notes on Active Directory
  1. If Active Directory is enabled and you try login via telnet, inquiry to the second and subsequent alternative servers may time out, causing the login to fail.
  2. If the value set by the timeout operand of the setad(8) command is small, and you log in to the XSCF, the user privilege may not be assigned to you. In this case, increase the timeout setting value and try again.

Top of Page