Skip to main content

Contents

  1. Preface
  2. Chapter 1 Latest Information
    1.  Latest Information
    2.  Revision Information
  3. Chapter 2 Software Requirements
    1. Click Supported Firmware and Oracle Solaris Versions
    2.  Web Browser
    3.  Software Supporting Remote Storage
    4.  XCP and Oracle Solaris Version Supporting Power Aware Dispatcher Function
    5.  How to Obtain XCP and Oracle Solaris SRU/Patch/Oracle VM Server for SPARC
    6. Click Notes on Memory
    7. Click Notes on Mixing Different Hardware
    8.  Obtaining the SAS-2 Integrated RAID Configuration Utility
  4. Chapter 3 Information on XCP
    1. Click Latest Information on XCP
    2.  XCP Firmware Versions and Support Information
    3. Click Notes and Restrictions
    4. Click Problems With XCP and Workarounds
  5. Chapter 4 Information on Oracle Solaris
    1. Click Notes and Restrictions
    2. Click Problems With Oracle Solaris and Workarounds
  6. Chapter 5 Information on SPARC M12 System Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  7. Chapter 6 Information on the PCI Expansion Unit
    1.  PCI Expansion Unit Firmware Versions and Support Information
    2. Click Direct I/O Function for the PCI Expansion Unit
    3. Click Problems With the PCI Expansion Unit and Workarounds
  8. Chapter 7 Information on SPARC M12 Manuals

Notes on the Power Supply Unit (PSU)


Notes on the Power Supply Unit (PSU)
XCP 3070 or later has two added error log entries on power supply unit (PSU) failures.
If the PSU input power is turned off or an error occurs in the primary circuit of the PSU, the following error log entry is registered.
PSU input power has been lost or the input circuit has failed.(/PSU#x_path)
If this error log entry is registered, check the PSU input power to find out whether the PSU failed.
Also, the following error log entry is registered when the PSU input power is restored.
PSU input power has been recovered.(/PSU#x_path)
The CHECK LED on the operation panel is turned on/off and the specified destination is notified too when either of these error log entries is registered.

Top of Page