Skip to main content

Latest Information on XCP 4030


Latest Information on XCP 4030
This section describes major changes in XCP 4030.
This XCP version modifies XSCF firmware.
Note - After the firmware update completes, power-off/power-on of the physical partition may be required.
For details on the firmware update, see "Chapter 16  Updating the XCP Firmware‌" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.
  1. XCP firmware defects were improved (RTIF2-230301-001).
  2. DSA host keys and DSA user public keys cannot be used for SSH connection any longer.
  3. The default encryption protocol used with the SNMPv3 agent was changed to Advanced Encryption Standard (AES).