Skip to main content

Contents

  1. Preface
  2. Chapter 1 Latest Information
    1.  Latest Information
    2.  Revision Information
  3. Chapter 2 Software Requirements
    1. Click Supported Firmware and Oracle Solaris Versions
    2.  Web Browser
    3.  Software Supporting Remote Storage
    4.  XCP and Oracle Solaris Version Supporting Power Aware Dispatcher Function
    5.  How to Obtain XCP and Oracle Solaris SRU/Patch/Oracle VM Server for SPARC
    6. Click Notes on Memory
    7. Click Notes on Mixing Different Hardware
    8.  Obtaining the SAS-2 Integrated RAID Configuration Utility
  4. Chapter 3 Information on XCP
    1. Click Latest Information on XCP
    2.  XCP Firmware Versions and Support Information
    3. Click Notes and Restrictions
    4. Click Problems With XCP and Workarounds
  5. Chapter 4 Information on Oracle Solaris
    1. Click Notes and Restrictions
    2. Click Problems With Oracle Solaris and Workarounds
  6. Chapter 5 Information on SPARC M12 System Hardware
    1. Click Notes and Restrictions
    2.  Problems With Hardware and Workarounds
  7. Chapter 6 Information on the PCI Expansion Unit
    1.  PCI Expansion Unit Firmware Versions and Support Information
    2. Click Direct I/O Function for the PCI Expansion Unit
    3. Click Problems With the PCI Expansion Unit and Workarounds
  8. Chapter 7 Information on SPARC M12 Manuals

Setting/Displaying the Direct I/O Function


Setting/Displaying the Direct I/O Function
To set the direct I/O function for the PCI expansion unit, use the setpciboxdio(8) command of the XSCF firmware. To confirm the present settings, use the showpciboxdio(8) command.
For details on the setpciboxdio(8) and showpciboxdio(8) commands, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual or the manual page for each command.

Top of Page