Skip to main content

6.5 Configuring the XSCF Network


6.5 Configuring the XSCF Network
The XSCF network settings consist of XSCF network interface settings, such as for the XSCF-LAN and the protocol for SP to SP communication (SSCP), routing settings, and DNS-related settings. For details on the purpose and configuration of the XSCF network, see "3.9.1 Using Services Through the XSCF Network" to "3.9.5 Understanding the IP Addresses that are Set with SSCP" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.

Table 6-4 lists the setting items related to the XSCF network and the corresponding XSCF shell commands.
Here, set the essential items in the table. This manual does not describe cases about setting optional items. See "3.9 Configuring the XSCF Network" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.
Table 6-4  Setting Items Related to the XSCF Network
Setting Item Implemented As Initial Setting? Reference Related Command
Host name/domain name Optional "6.5.1 Setting an XSCF Host Name and Domain Name" sethostname
showhostname
XSCF network IP address
- XSCF-LAN

- Net mask
Implemented "6.5.2 Setting an Ethernet (XSCF-LAN) IP Address" setnetwork
shownetwork
Enabling/Disabling the network Optional "3.9.8 Enabling/Disabling the XSCF Network and Setting an XSCF-LAN IP Address and Net Mask" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide setnetwork shownetwork
Adding/Deleting a network route
- Destination IP address

- Gateway

- Net mask
Implemented "6.5.3 Setting the Routing" setroute
showroute
Adding/Deleting a DNS
- Name server

- Search path
Optional "3.9.13 Setting the DNS for the XSCF" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide setnameserver
shownameserver
IP packet filtering rule Optional "3.9.14 Setting the IP Packet Filtering Rules for the XSCF Network" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide setpacketfilters
showpacketfilters
Applying the network Implemented "6.5.4 Applying Network Settings" applynetwork
rebootxscf