Skip to main content

Contents

  1. Preface
  2. Chapter 1 Understanding the Installation Flow
    1.  1.1 Workflows for the SPARC M12-2
    2.  1.2 Workflow at Expansion With the PCI Expansion Unit
  3. Chapter 2 Planning and Preparing for System Installation
    1.  2.1 Safety Precautions
    2.  2.2 Items Requiring Confirmation Before Installation
    3. Click 2.3 Confirming the Physical Specifications of the System
    4. Click 2.4 Confirming Rack Specifications
    5. Click 2.5 Checking Environmental Conditions
    6.  2.6 Checking Acoustic Noise Levels
    7.  2.7 Checking Cooling Conditions
    8. Click 2.8 Checking the Power Input Type
    9. Click 2.9 Preparing Power Supply Facilities
    10. Click 2.10 Checking External Interface Port Specifications
    11.  2.11 Checking the Functions of the Operation Panel
  4. Chapter 3 Installing the System
    1.  3.1 Preparing the Necessary Tools/Information for Installation
    2. Click 3.2 Confirming Delivered Components
    3. Click 3.3 Mounting the SPARC M12-2 and the PCI Expansion Unit in a Rack
    4. Click 3.4 Mounting Optional Components
  5. Chapter 4 Connecting Cables to the SPARC M12-2 and the PCI Expansion Unit
    1.  4.1 Connecting Cables to the SPARC M12-2
    2.  4.2 Connecting Cables to the PCI Expansion Unit
    3.  4.3 Storing Cables
  6. Chapter 5 Performing an Initial System Diagnosis
    1.  5.1 Connecting the System Management Terminal
    2.  5.2 Turning On the Input Power and Starting the XSCF
    3.  5.3 Logging In to the XSCF
    4.  5.4 Checking the XCP Firmware Version
    5.  5.5 Checking the Altitude Setting
    6.  5.6 Setting the Time
    7.  5.7 Performing a Diagnosis Test
    8.  5.8 Checking the Component Status
  7. Chapter 6 Making the Initial System Settings
    1.  6.1 Setting the Password Policy
    2.  6.2 Setting a User Account and Password
    3. Click 6.3 Configuring the Telnet/SSH Service
    4.  6.4 Configuring the HTTPS Service
    5. Click 6.5 Configuring the XSCF Network
    6.  6.6 Configuring Memory Mirroring
    7.  6.7 Creating a PPAR Configuration List
    8.  6.8 Checking the Physical Partition (PPAR) Status
    9.  6.9 Synchronizing the Physical Partition (PPAR) Time and XSCF Time
    10. Click 6.10 Registering a CPU Activation Key
    11.  6.11 Assigning CPU Core Resources
    12.  6.12 Starting and Stopping a System (PPAR)
    13.  6.13 Installing Oracle Solaris
    14. Click 6.14 Saving Configuration Information
  8. Appendix A Troubleshooting
    1.  A.1 Understanding the Usual Problems and Their Corrective Actions
    2. Click A.2 Understanding Commands for Troubleshooting
  9. Appendix B Setup Command Workflow
  10. Appendix C Installation Procedure Checklist

2.9.2 Power Cord Specifications


2.9.2 Power Cord Specifications
Table 2-10 and Table 2-11 list the power cords and connector shapes for the SPARC M12-2 and PCI expansion unit.
Table 2-10  Power Cords and Connector Shapes (SPARC M12-2)
Destination Power Cord Type Connector Shape
Japan NEMA L6-15P 250V 15A IEC 60320-C13
North America NEMA L6-15P 250V 15A IEC 60320-C13
Europe CEE7/7  
U.K. BS1363A  
Italy CEI 23-16/Ⅶ  
China GB 2099 250V  
Taiwan NEMA 6-20  
Korea KSC 8305 250V  
Denmark DEMKO 107  
Israel SI 32  
India IS 1293  
South Africa SABS 164  
Argentina IRAM2073 250V  
Australia AS/NZS 3112  
Brazil NBR14136 250V  
Switzerland SEV 1011  
Other countries IEC60309IP44 250V 10A
IEC60320-C14 250V 10A		  
Table 2-11  Power Cords and Connector Shapes (PCI Expansion Unit)
Destination Power Cord Type Connector Shape
Japan NEMA 5-15P 125V 15A
NEMA L6-15P 250V 15A		 IEC 60320-C13
North America NEMA 5-15P 125V 15A
NEMA L6-15P 250V 15A
IEC60320-C14 250V 10A		  
Europe CEE7/7  
U.K. BS1363A  
Italy CEI 23-16/Ⅶ  
China GB 2099 250V  
Taiwan NEMA 6-20  
Korea KSC 8305 250V  
Denmark DEMKO 107  
Israel SI 32  
India IS 1293  
South Africa SABS 164  
Argentina IRAM2073 250V  
Australia AS/NZS 3112  
Brazil NBR14136 250V  
Switzerland SEV 1011  
Other countries IEC60309IP44 250V 10A
IEC60320-C14 250V 10A		  
Note - For chassis with plugs that have a lock function, confirm that the chassis has a 15 A overcurrent protection device. If they do not have that device, provide 15 A overcurrent protection by using a circuit breaker, fuse, etc. The plugs with a lock function are NEMA L6-15 and other plugs that are not parallel two-pole connectors with grounding electrodes.

Top of Page