6.14.2 Saving XSCF Setting Information
6.14.2 Saving XSCF Setting Information
Save XSCF setting information.
This section describes procedures for saving XSCF setting information via a network and saving the setting information to a USB device.
For details on how to restore the setting information, see "10.10 Saving/Restoring XSCF Settings Information" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.
This section describes procedures for saving XSCF setting information via a network and saving the setting information to a USB device.
For details on how to restore the setting information, see "10.10 Saving/Restoring XSCF Settings Information" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.
- Specifying the target directory and saving the setting information via a network
- Specify the target directory and the output file name, and execute the dumpconfig command.
XSCF> dumpconfig ftp://server/backup/backup-sca-ff2-16.txt |
- Confirm the identification information at the beginning of the saved configuration file when the data transfer has completed.
- Saving the setting information to a USB device at the XSCF
- Connect a USB device to a USB port on the XSCF unit panel (rear panel).
- Specify the name of the output file for the local USB device on the XSCF, and execute the dumpconfig command.
XSCF> dumpconfig file:///media/usb_msd/backup-file.txt |
- After the data transfer has completed, remove the USB device from the USB port.
- Confirm the identification information at the beginning of the saved configuration file.
- Configuration file format
The saved configuration file has the following format:
- File name: User-specified name
- File format: base64 encoding text
< Previous Page | Next Page >