Skip to main content

Contents

  1. Preface
  2. Chapter 1 Understanding the Installation Flow
    1.  1.1 Workflows for the SPARC M12-2
    2.  1.2 Workflow at Expansion With the PCI Expansion Unit
  3. Chapter 2 Planning and Preparing for System Installation
    1.  2.1 Safety Precautions
    2.  2.2 Items Requiring Confirmation Before Installation
    3. Click 2.3 Confirming the Physical Specifications of the System
    4. Click 2.4 Confirming Rack Specifications
    5. Click 2.5 Checking Environmental Conditions
    6.  2.6 Checking Acoustic Noise Levels
    7.  2.7 Checking Cooling Conditions
    8. Click 2.8 Checking the Power Input Type
    9. Click 2.9 Preparing Power Supply Facilities
    10. Click 2.10 Checking External Interface Port Specifications
    11.  2.11 Checking the Functions of the Operation Panel
  4. Chapter 3 Installing the System
    1.  3.1 Preparing the Necessary Tools/Information for Installation
    2. Click 3.2 Confirming Delivered Components
    3. Click 3.3 Mounting the SPARC M12-2 and the PCI Expansion Unit in a Rack
    4. Click 3.4 Mounting Optional Components
  5. Chapter 4 Connecting Cables to the SPARC M12-2 and the PCI Expansion Unit
    1.  4.1 Connecting Cables to the SPARC M12-2
    2.  4.2 Connecting Cables to the PCI Expansion Unit
    3.  4.3 Storing Cables
  6. Chapter 5 Performing an Initial System Diagnosis
    1.  5.1 Connecting the System Management Terminal
    2.  5.2 Turning On the Input Power and Starting the XSCF
    3.  5.3 Logging In to the XSCF
    4.  5.4 Checking the XCP Firmware Version
    5.  5.5 Checking the Altitude Setting
    6.  5.6 Setting the Time
    7.  5.7 Performing a Diagnosis Test
    8.  5.8 Checking the Component Status
  7. Chapter 6 Making the Initial System Settings
    1.  6.1 Setting the Password Policy
    2.  6.2 Setting a User Account and Password
    3. Click 6.3 Configuring the Telnet/SSH Service
    4.  6.4 Configuring the HTTPS Service
    5. Click 6.5 Configuring the XSCF Network
    6.  6.6 Configuring Memory Mirroring
    7.  6.7 Creating a PPAR Configuration List
    8.  6.8 Checking the Physical Partition (PPAR) Status
    9.  6.9 Synchronizing the Physical Partition (PPAR) Time and XSCF Time
    10. Click 6.10 Registering a CPU Activation Key
    11.  6.11 Assigning CPU Core Resources
    12.  6.12 Starting and Stopping a System (PPAR)
    13.  6.13 Installing Oracle Solaris
    14. Click 6.14 Saving Configuration Information
  8. Appendix A Troubleshooting
    1.  A.1 Understanding the Usual Problems and Their Corrective Actions
    2. Click A.2 Understanding Commands for Troubleshooting
  9. Appendix B Setup Command Workflow
  10. Appendix C Installation Procedure Checklist

6.2 Setting a User Account and Password


6.2 Setting a User Account and Password
Set a user account and password appropriate to the use environment, and assign a user privilege to the user account. Be sure to register at least one user account having the platadm and useradm user privileges.
  1. Execute the adduser command to add a user account.
    The following example specifies jsmith for the user account name. If -u is not specified, a UID is automatically assigned.
XSCF> adduser jsmith
  1. The following example adds a user account with a UID specified.
XSCF> adduser -u 359 jsmith
  1. Execute the password command, and specify a password.
XSCF> password jsmith
Password:
Retype new password:
passwd: password updated successfully
XSCF>
Note - When a user with the useradm privileges specifies another user's account, the password can be specified regardless of the set value in the setpasswordpolicy(8) command.
  1. The following example specifies 60 days for the expiration time and 15 days ahead as the start date for warnings before the password expires.
XSCF> password -M 60 -w 15 jsmith
  1. Execute the setprivileges command to assign a user privilege to the user account.
    The setprivileges command can set the following as user privileges for the entire system.
Table 6-3  User Privileges
User Privilege Overview Description of Privilege
platadm Manage the whole system.
- Can perform all hardware operations for the system.

- Can manipulate all XSCF settings except those requiring the useradm and XSCF audit privileges.

- Can add/delete hardware in a PPAR.

- Can perform power operations for a physical partition.

- Can refer to all of the status of the server.
useradm Manage user accounts.
- Can create, delete, enable, and disable user accounts.

- Can change user passwords and password profiles.

- Can change user privileges.
auditop Refer to the audit status.
- Can refer to the XSCF audit status and audit methods.
auditadm Control auditing.
- Can control XSCF auditing.

- Can delete XSCF audit methods.
fieldeng Allow use by field engineers.
- Permits field engineers to only be able to perform maintenance work and change device configurations.
  1. The following example specifies useradm and platadm for the user account.
XSCF> setprivileges jsmith useradm platadm
Note - The setprivileges command assigns the user privilege of the specified operand.
To add a new user privilege to a user account already assigned a user privilege, specify the existing user privilege too.
  1. Execute the showuser command to check information on a created user account.
XSCF> showuser -l
User Name: jsmith
UID: 359
Status: Enabled
Minimum: 0
Maximum: 60
Warning: 15
Inactive: -1
Last Change: May 22, 2016
Password Expires: Jul 21, 2016
Password Inactive: Never
Account Expires: Never
Privileges: useradm
platadm
Note - Considering maintenance work, be sure to prepare a field engineer (FE) user account that has the fieldeng user privilege.
In addition to the fieldeng user privilege, we recommend that the system administrator create accounts with the platadm, useradm, and auditadm user privileges.

Top of Page