Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12-1 Installation Guide >
  9. 2.11 Checking the Functions of the Operation Panel

Contents

  1. Preface
  2. Chapter 1 Understanding the Installation Flow
    1.  1.1 Workflow for the SPARC M12-1
    2.  1.2 Workflow for Adding the PCI Expansion Unit
  3. Chapter 2 Planning and Preparing for System Installation
    1.  2.1 Safety Precautions
    2.  2.2 Items Requiring Confirmation Before Installation
    3. Click 2.3 Confirming the Physical Specifications of the System
    4. Click 2.4 Confirming Rack Specifications
    5. Click 2.5 Checking Environmental Conditions
    6.  2.6 Checking Acoustic Noise Levels
    7.  2.7 Checking Cooling Conditions
    8. Click 2.8 Checking the Power Input Type
    9. Click 2.9 Preparing Power Supply Facilities
    10. Click 2.10 Checking External Interface Port Specifications
    11.  2.11 Checking the Functions of the Operation Panel
  4. Chapter 3 Installing the System
    1.  3.1 Preparing the Necessary Tools/Information for Installation
    2. Click 3.2 Confirming Delivered Components
    3.  3.3 Confirming the Rack
    4. Click 3.4 Mounting the Chassis in a Rack
    5. Click 3.5 Mounting Optional Components
  5. Chapter 4 Connecting Cables
    1.  4.1 Connecting Cables to the SPARC M12-1
    2.  4.2 Connecting Cables to the PCI Expansion Unit
  6. Chapter 5 Performing an Initial System Diagnosis
    1.  5.1 Connecting the System Management Terminal to the Chassis
    2.  5.2 Turning On the Input Power and Starting the XSCF
    3.  5.3 Logging In to the XSCF
    4.  5.4 Checking the XCP Version
    5.  5.5 Checking the Altitude Setting
    6.  5.6 Setting the Time
    7.  5.7 Performing a Diagnosis Test
    8.  5.8 Checking the Component Status
  7. Chapter 6 Making the Initial System Settings
    1.  6.1 Setting the Password Policy
    2.  6.2 Setting a User Account and Password
    3. Click 6.3 Configuring the Telnet/SSH Service
    4.  6.4 Configuring the HTTPS Service
    5. Click 6.5 Configuring the XSCF Network
    6.  6.6 Configuring Memory Mirroring
    7.  6.7 Creating a PPAR Configuration List
    8.  6.8 Checking the Physical Partition (PPAR) Status
    9.  6.9 Synchronizing the Physical Partition (PPAR) Time and XSCF Time
    10. Click 6.10 Registering a CPU Activation Key
    11.  6.11 Assigning CPU Core Resources
    12.  6.12 Starting/Stopping the System (PPAR)
    13.  6.13 Installing Oracle Solaris
    14. Click 6.14 Saving Configuration Information
  8. Appendix A Troubleshooting
    1.  A.1 Understanding the Usual Problems and Their Corrective Actions
    2. Click A.2 Understanding Commands for Troubleshooting
  9. Appendix B Setup Command Workflow
  10. Appendix C Installation Procedure Checklist

2.11 Checking the Functions of the Operation Panel


2.11 Checking the Functions of the Operation Panel
This section describes the functions of the operation panel mounted on the SPARC M12-1.
You can check system operation with the system display (LEDs) and operation functions on the operation panel.
Figure 2-19 shows the SPARC M12-1 operation panel, and Table 2-12 shows the LEDs and switches on the operation panel.
For details on system operations not covered in the functional outline of Table 2-12, see "2.3 Confirming the Functions of the Operation Panel" in the Fujitsu SPARC M12-1 Service Manual.
Figure 2-19  SPARC M12-1 Operation Panel
Figure 2-19 SPARC M12-1 Operation Panel
Table 2-12  LEDs and Switches on the Operation Panel
No. LED/Switch Functional Outline
1 POWER LED Indicates the operating status of the system.
 On: The system is running.
 Off: The system is stopped.
 Blinking: The system is being stopped.
2 XSCF STANDBY LED Indicates the XSCF status of the system.
 On: The XSCF is running.
 Off: The XSCF is stopped.
 Blinking: The XSCF is being started.
3 CHECK LED Indicates whether the SPARC M12-1 is in an abnormal state.
 Off: Normal state, or no power being supplied
 On: Hardware has detected an error.
4 Mode switch Sets the system operation mode.
5 POWER switch Starts/Stops the system.
You can perform the following operations with the switches shown at (4) and (5) in Figure 2-19.

  1. Mode switch
    This switch sets the start mode for the system. You can switch between Locked mode and Service mode on the mode switch by sliding the switch.

    - Locked mode (locked_mode )
    This mode is used during normal operation.
    You can turn on the power but cannot turn off the power with the POWER switch. This mechanism disables power-off in order to prevent users from turning off the power by mistake.

    - Service mode (service_mode )
    This mode is used during maintenance work.
    You can turn off the power with the POWER switch, but the switch is inhibited from turning on the power. Maintenance with the whole system stopped is performed in Service mode.

  2. POWER switch
    You can start or stop the system.
    The operation to start or stop the system depends on how the POWER switch is pressed and the setting of the system mode switch.

Top of Page