Skip to main content

Contents

  1. Preface
  2. Chapter 1 Understanding the Installation Flow
    1.  1.1 Workflow for the SPARC M10-4
    2. Click 1.2 Workflow When Installing the PCI Expansion Unit
  3. Chapter 2 Planning and Preparing for System Installation
    1.  2.1 Safety Precautions
    2.  2.2 Items Requiring Confirmation before Installation
    3. Click 2.3 Confirming the Physical Specifications of the System
    4. Click 2.4 Confirming Rack Specifications
    5. Click 2.5 Checking Environmental Conditions
    6.  2.6 Checking Acoustic Noise Levels
    7.  2.7 Checking Cooling Conditions
    8. Click 2.8 Checking the Power Input Type
    9. Click 2.9 Preparing Power Supply Facilities
    10. Click 2.10 Checking External Interface Port Specifications
    11.  2.11 Checking the Functions of the Operation Panel
  4. Chapter 3 Installing the System
    1.  3.1 Preparing the Necessary Tools/Information for Installation
    2. Click 3.2 Confirming Delivered Components
    3. Click 3.3 Mounting the Chassis in a Rack
    4. Click 3.4 Mounting Optional Components
  5. Chapter 4 Connecting Cables to the Chassis
    1.  4.1 Connecting Cables to the SPARC M10-4
    2.  4.2 Connecting Cables to the PCI Expansion Unit
  6. Chapter 5 Performing an Initial System Diagnosis
    1.  5.1 Connecting the System Management Terminal to the Chassis
    2.  5.2 Turning on the Input Power and Starting the XSCF
    3.  5.3 Logging In to the XSCF
    4.  5.4 Checking the XCP Version
    5.  5.5 Checking the Altitude Setting
    6.  5.6 Checking the Time Setting
    7.  5.7 Performing a Diagnosis Test
    8.  5.8 Checking the Component Status
  7. Chapter 6 Making the Initial System Settings
    1.  6.1 Setting the Password Policy
    2.  6.2 Setting a User Account and Password
    3. Click 6.3 Configuring the Telnet/SSH Service
    4.  6.4 Configuring the HTTPS Service
    5. Click 6.5 Configuring the XSCF Network
    6.  6.6 Configuring Memory Mirroring
    7.  6.7 Creating a Physical Partition Configuration List (PCL)
    8.  6.8 Confirming That a System Board (PSB) is Assigned to a Physical Partition (PPAR)
    9.  6.9 Setting a CPU Operational Mode for the Physical Partition
    10.  6.10 Synchronizing the Physical Partition (PPAR) Time and XSCF Time
    11. Click 6.11 Registering a CPU Activation Key
    12.  6.12 Assigning CPU Core Resources
    13.  6.13 Starting and Stopping a Physical Partition (PPAR)
    14. Click 6.14 Saving Configuration Information
  8. Appendix A Troubleshooting
    1.  A.1 Understanding the Usual Problems and Their Corrective Actions
    2. Click A.2 Understanding Commands for Troubleshooting
  9. Appendix B Setup Command Workflow
  10. Appendix C Installation Procedure Checklist

2.9.2 Power cord specifications


2.9.2 Power cord specifications
Table 2-10 and Table 2-11 list the power cords and connector shape for each chassis.
Table 2-10  Power cords and connector shape (SPARC M10-4)
Destination Power cord type Connector shape
Japan IEC60320-C20 250V 16A
NEMA L6-20P 250V 20A		 IEC 60320-C19
North America IEC60320-C20 250V 16A
NEMA L6-20P 250V 20A
IEC60309 250V 16A		  
South America IEC60309 250V 16A  
China IEC60309 250V 16A  
Hong Kong IEC60309 250V 16A  
Taiwan NEMA L6-20P 250V 20A  
Korea NEMA L6-20P 250V 20A  
India IS1293 250V 16A  
Other countries IEC 60309 IP44 250V 16A  
Table 2-11  Power cords and connector shape (PCI expansion unit)
Destination Power cord type Connector shape
Japan NEMA 5-15P 125V 15A
NEMA L6-15P 250V 15A		 IEC 60320-C13
North America NEMA 5-15P 125V 15A
NEMA L6-15P 250V 15A
IEC60320-C14 250V 10A		  
South America IRAM2073 250V 10A
NBR14136 250V 10A		  
China GB2099.1 250V 10A  
Hong Kong BSI363A 250V 10A  
Taiwan CNS10917 250V 10A  
Korea KSC8305 250V 10A  
India IS1293 250V 16A  
Other countries IEC 60309 IP44 250V 10A
IEC60320-C14 250V 10A		  

Top of Page