Chapter 4 Factory-Default Mounting Order of PCI Cards
Chapter 4 Factory-Default Mounting Order of PCI Cards
This chapter describes the factory-default mounting order of PCI cards.
PCI cards ordered together with a SPARC M10 system or PCI expansion unit are mounted in each chassis according to the rules described in this chapter and shipped from the factory.
PCI cards are classified into groups A, B, C, and D, and mounted in the order of mounting priority (from highest to lowest) shown in Table 4-1 or Table 4-2.
In the PCI slots of the SPARC M10-1, the PCI cards of each group are mounted in the PCI slot order shown in the corresponding column of Table 4-3.
In the PCI slots of the SPARC M10-4, the PCI cards of each group are mounted in the PCI slot order shown in the corresponding column of Table 4-4.
In the PCI slots of the SPARC M10-4S, the PCI cards of each group are mounted in the PCI slot order shown in the corresponding column of Table 4-5.
In the PCI slots in the PCI expansion unit, the PCI cards are mounted in the order shown in Table 4-6.
PCI cards ordered together with a SPARC M10 system or PCI expansion unit are mounted in each chassis according to the rules described in this chapter and shipped from the factory.
PCI cards are classified into groups A, B, C, and D, and mounted in the order of mounting priority (from highest to lowest) shown in Table 4-1 or Table 4-2.
In the PCI slots of the SPARC M10-1, the PCI cards of each group are mounted in the PCI slot order shown in the corresponding column of Table 4-3.
In the PCI slots of the SPARC M10-4, the PCI cards of each group are mounted in the PCI slot order shown in the corresponding column of Table 4-4.
In the PCI slots of the SPARC M10-4S, the PCI cards of each group are mounted in the PCI slot order shown in the corresponding column of Table 4-5.
In the PCI slots in the PCI expansion unit, the PCI cards are mounted in the order shown in Table 4-6.
Note that PCI card mounting location is not necessarily according to the mounting rules described in this chapter. Observe the PCI card mounting rules from Chapter 1 to Chapter 3 and determine the mounting location.
| Group | Product Name | Product ID | Mounting Priority Order |
|---|---|---|---|
| A | PCI expansion unit connection card | SPME8LK1F | High |
| C | Graphics card | SP0X7GR1F | | |
| A | Dual Port InfiniBand 4x QDR card | SP1X7BA12F | | |
| D | Dual 25 Gigabit Ethernet card | SP1X7JD1F | | |
| A | Dual-channel 10Gbps FCoE card (for optical cable) | SP1X7FBR2F | | |
| A | Dual-channel 10Gbps FCoE card (for Copper Twinax cable) | SP1X7FBS2F | | |
| A | Dual-channel 10Gbps FCoE card (for optical cable) | SP1X7FAR2F | | |
| A | Dual-channel 10Gbps FCoE card (for Copper Twinax cable) | SP1X7FAS2F | | |
| A | Dual 10Gbps FCoE card (for optical cable) | SE0X7EF12F | | |
| A | Dual 10Gbps FCoE card (for Copper Twinax cable) | SE0X7EC12F | | |
| A | Dual 10Gigabit Ethernet card | SE1X7HE3G | | |
| A | Dual 10Gigabit Ethernet card (10GBase-T) | SP1X7HF1F | | |
| A | Dual-channel 16Gbps Fibre Channel card (SR SFP+) | SP1X7FBA2F | | |
| A | Dual-channel 8Gbps Fibre Channel card | SE0X7F32F | | |
| A | Single-channel 8Gbps Fibre Channel card | SE0X7F31F | | |
| A | Quad 10 Gigabit Ethernet card | SP1X7HH1F | Low |
| B | Dual 40 Gigabit Ethernet card | SP1X7HG1F | High |
| B | Dual Port InfiniBand 4x QDR card | SE1X7BA12F | | |
| B | Dual-channel 32 Gbps Fibre Channel card | SP1X7FAC2F | | |
| B | Dual-channel 32 Gbps Fibre Channel card | SP1X7FBC2F | | |
| B | Quad-channel 16Gbps Fibre Channel card (SR) | SP0X7FAA4F | | |
| B | 3.2 TB Flash Accelerator Card | SP0X7Y42F | | |
| B | Flash Accelerator F320 card | SP1X7Y41F | | |
| B | Flash Accelerator F160 card | SP1X7Y31F | | |
| B | Dual-channel 16Gbps Fibre Channel card (SR SFP+) | SP1X7FAA2F | | |
| B | Dual-channel 16Gbps Fibre Channel card (LR SFP+) | SP1X7FAB2F | | |
| B | Flash Accelerator F80 card | SP1X7Y21F | | |
| B | Flash Accelerator F40 card | SP1X7Y11F | | |
| B | 12Gbps SAS card | SP1X7SA3F | | |
| B | Dual-channel 8Gbps Fibre Channel card | SE0X7F22F | | |
| B | 6Gbps SAS card | SE0X7SA2F | | |
| B | Single-channel 8Gbps Fibre Channel card | SE0X7F21F | | |
| B | SAS card | SE0X7SA1F | | |
| B | Quad Gigabit Ethernet card (UTP) | SP1X7GQ2F | | |
| B | Quad Gigabit Ethernet card (UTP) | SP1X7GQ1F | | |
| B | Dual Gigabit Ethernet card (MMF) | SP1X7GD2F | | |
| B | Dual Gigabit Ethernet card (MMF) | SP1X7GD1F | Low |
| Group | Product Name | ATO Product ID | Mounting Priority Order |
|---|---|---|---|
| A | Link card kit | 7105513 | High |
| A | Oracle Dual Port QDR InfiniBand Adapter M3 | 7104073 | | |
| D | Oracle Dual Port 25 Gb Ethernet Adapter | 7118015 | | |
| A | Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex (with FCoE transceivers or TwinAx cables) | 7101683 (with FCoE transceivers or no transceiver) |
| |
| A | Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic (with FCoE transceivers or TwinAx cables) | 7101673 (with FCoE transceivers or no transceiver) |
| |
| A | Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and SR optics | SG-PCIEFCOE2-Q-SR | | |
| A | Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX | SG-PCIEFCOE2-Q-TA | | |
| A | Sun Dual 10 GbE SFP+ PCIe 2.0 Low Profile Adapter | 1109A-Z | | |
| A | Sun Dual Port 10GBase-T Adapter | 7100563 | | |
| A | PCIe Quad port GigE (copper) x8 lane card | 4447A-Z-N | | |
| A | PCI-E Low-Profile Dual GigE MMF, low profile bracket on board, stand bracket included | 7281A-2-N | | |
| A | Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex (with 16 Gb FC transceivers) | 7101683 (with 16 Gb FC transceivers) |
| |
| A | 8 Gb FC PCIe, Emulex, Dual Port |
SG-PCIE2FC-EM8-Z | | |
| A | 8 Gb FC PCIe, Emulex, Single Port |
SG-PCIE1FC-EM8-Z | | |
| A | Oracle Quad Port 10GBase-T Adapter | 7111182 | Low |
| B | Oracle Quad 10 Gb or Dual 40 Gb Ethernet Adapter | 7114148 | High |
| B | Sun InfiniBand QDR Host Channel Adapter PCIe | 4242A | | |
| B | Oracle Storage Dual-Port 32 Gb Fibre Channel PCIe Low Profile HBA, QLogic | 7115460 | | |
| B | Oracle Storage Dual-Port 32 Gb Fibre Channel PCIe Low Profile HBA, Emulex | 7115459 | | |
| B | Fujitsu 3.2 TB Flash Accelerator Card | 7119601 | | |
| B | Oracle Flash Accelerator F320 PCIe Card | 7113825 | | |
| B | Flash Accelerator F160 PCIe Card | 7110864 | | |
| B | Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic (with 16 Gb FC transceivers) | 7101673 (with 16 Gb FC transceivers) |
| |
| B | Flash Accelerator F80 PCIe Card: 800GB, eMLC | 7107091 | | |
| B | Flash Accelerator F40 PCIe Card: 400GB, eMLC | 7104480 | | |
| B | Oracle Storage 12 Gb SAS PCIe HBA, external: 8 port | 7110118 | | |
| B | 8 Gb FC PCIe, QLogic, Dual Port |
SG-PCIE2FC-QF8-Z | | |
| B | Sun Storage 6 Gb SAS PCIe HBA: 8 ports, external | SG-SAS6-EXT-Z | | |
| B | 8 Gb FC PCIe, QLogic, Single Port |
SG-PCIE1FC-QF8-Z | | |
| B | Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter | SG-PCIE8SAS-E-Z-N | | |
| B | Sun Quad Port GbE PCIe 2.0 Low Profile Adapter, UTP | 7100479 | | |
| B | Sun Dual Port GbE PCIe 2.0 Low Profile Adapter, MMF | 7100482 | Low |
| Mounting Order of PCI Slots (*) | |||||||
|---|---|---|---|---|---|---|---|
| For Oracle Solaris 11 or for Oracle Solaris 10 Without PCI Expansion Unit Connection Cards Ordered Together |
For Oracle Solaris 10 With PCI Expansion Unit Connection Cards Ordered Together | ||||||
| PCI Slot Number | Group A | Group B | Group C | Group D | Group A | Group B | Group C |
| Slot#0 | 2nd | 2nd | 2nd | 2nd | 2nd | 2nd | - |
| Slot#1 | 1st | 3rd | - | 1st | 1st | 3rd | - |
| Slot#2 | 3rd | 1st | 1st | 3rd | - | 1st | 1st |
-: Cannot be mounted *1 The version of Oracle Solaris must comply with the version of the preinstalled OS. |
|||||||
| Mounting Order of PCI Slots (*1) (*2) | |||||||
|---|---|---|---|---|---|---|---|
| For Oracle Solaris 11 or for Oracle Solaris 10 Without PCI Expansion Unit Connection Cards Ordered Together (*3) |
For Oracle Solaris 10 With PCI Expansion Unit Connection Cards Ordered Together | ||||||
| PCI Slot Number | Group A | Group B | Group C | Group A: 2CPU | Group A: 4CPU | Group B | Group C |
| Slot#0 | 1st | 11th | - | 1st | 1st | 11th | - |
| Slot#1 | 4th | 8th | 1st | - | 4th | 8th | 1st |
| Slot#2 | 9th | 3rd | 2nd | - | - | 3rd | 2nd |
| Slot#3 | 2nd | 10th | - | 2nd | 2nd | 10th | - |
| Slot#4 | 7th | 5th | - | - | - | 5th | - |
| Slot#5 | 5th | 7th | - | - | 5th | 7th | - |
| Slot#6 | 10th | 2nd | - | - | - | 2nd | - |
| Slot#7 | 3rd | 9th | - | 3rd | 3rd | 9th | - |
| Slot#8 | 8th | 4th | - | - | - | 4th | - |
| Slot#9 | 6th | 6th | - | - | 6th | 6th | - |
| Slot#10 | 11th | 1st | - | - | - | 1st | - |
-: Cannot be mounted *1 The version of Oracle Solaris must comply with the version of the preinstalled OS. *2 In a 2-CPU configuration with the Dual Port InfiniBand 4x QDR card (SP1X7BA12F) or InfiniBand Adapter M3 (7104073) mounted in Slot#0, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot be used. If this card is mounted in Slot#7, Slot#9 and #10 cannot be used. *3 The cards below may be shipped mounted in slots that are no longer available for mounting when a jumbo frame is used. In that case, move the cards to available slots. [LAN] SP1X7HF1F, SE1X7HE3G 7100563, 1109A-Z, 4447A-Z-N, 7281A-2-N [FCoE] SE0X7EF12F, SE0X7EC12F, SP1X7FAR2F, SP1X7FAS2F SG-PCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA 7101673 (with FCoE transceiver or no transceiver) 7101683 (with FCoE transceiver or no transceiver) |
|||||||
| Mounting Order of PCI Slots (*1) (*2) | |||||||
|---|---|---|---|---|---|---|---|
| For Oracle Solaris 11 or for Oracle Solaris 10 Without PCI Expansion Unit Connection Cards Ordered Together (*3) |
For Oracle Solaris 10 With PCI Expansion Unit Connection Cards Ordered Together | ||||||
| PCI Slot Number | Group A | Group B | Group C | Group A: 2CPU | Group A: 4CPU | Group B | Group C |
| Slot#0 | 1st | 8th | - | 1st | 1st | 8th | - |
| Slot#1 | 4th | 5th | 1st | - | 4th | 5th | 1st |
| Slot#2 | 7th | 2nd | 2nd | - | - | 2nd | 2nd |
| Slot#3 | 2nd | 7th | - | 2nd | 2nd | 7th | - |
| Slot#4 | 6th | 3rd | - | - | - | 3rd | - |
| Slot#5 | 5th | 4th | - | - | 5th | 4th | - |
| Slot#6 | 8th | 1st | - | - | - | 1st | - |
| Slot#7 | 3rd | 6th | - | 3rd | 3rd | 6th | - |
-: Cannot be mounted *1 The version of Oracle Solaris must comply with the version of the preinstalled OS. *2 In a 2-CPU configuration with the Dual Port InfiniBand 4x QDR card (SP1X7BA12F) or InfiniBand Adapter M3 (7104073) mounted in Slot#0, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot be used. *3 The cards below may be shipped mounted in slots that are no longer available for mounting when a jumbo frame is used. In that case, move the cards to available slots. [LAN] SP1X7HF1F, SE1X7HE3G 7100563, 1109A-Z, 4447A-Z-N, 7281A-2-N [FCoE] SE0X7EF12F, SE0X7EC12F, SP1X7FAR2F, SP1X7FAS2F SG-PCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA 7101673 (with FCoE transceiver or no transceiver) 7101683 (with FCoE transceiver or no transceiver) |
|||||||
| PCI Slot Number | Mounting Order of PCI Slots |
|---|---|
| Common to Group A/B | |
| Slot#1 | 1st |
| Slot#2 | 6th |
| Slot#3 | 7th |
| Slot#4 | 2nd |
| Slot#5 | 5th |
| Slot#6 | 8th |
| Slot#7 | 11th |
| Slot#8 | 3rd |
| Slot#9 | 4th |
| Slot#10 | 9th |
| Slot#11 | 10th |
< Previous Page | Next Page >