Skip to main content

Contents

  1. Preface
  2. Chapter 1 PCI Card Mounting Rules for the SPARC M10-1
    1. Click 1.1 Prerequisites
    2. Click 1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  1.3 Hardware Configuration Diagram
  3. Chapter 2 PCI Card Mounting Rules for the SPARC M10-4
    1. Click 2.1 Prerequisites
    2. Click 2.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  2.3 Relationship Between the CPU Configuration and the Number of Root Complexes
  4. Chapter 3 PCI Card Mounting Rules for the SPARC M10-4S
    1. Click 3.1 Prerequisites
    2. Click 3.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  3.3 Relationship Between the CPU Configuration and the Number of Root Complexes
  5. Chapter 4 Factory-Default Mounting Order of PCI Cards
  6. Appendix A Cards That Support PCI Hot Plug and Dynamic Reconfiguration
  7. Appendix B Cards That Support SR-IOV
  8. Appendix C Cards That Support Direct I/O
  9. Appendix D Cards That Support the Dynamic Reassignment Function for the PCIe End Point Device (PCIe Card)
  10. Appendix E Cards That Support EFI (GPT) Labeled Disks

3.1.1 Domain OS


3.1.1 Domain OS
The maximum number of each type of mounted PCI card and the available PCI slots may vary depending on the version of the Oracle Solaris that is installed on the domain.
Mounting rules vary depending on whether all OS versions of the control domain, root domain, and I/O domain are Oracle Solaris 11 only, Oracle Solaris 10 only, or a mixture of the two.
If an Oracle Solaris 10 environment is used in the following configurations, apply the rules for Oracle Solaris 11.
  1. A guest domain of an Oracle Solaris 10 environment is configured using the virtual I/O services of a control domain or the root domain of Oracle Solaris 11.
  2. An Oracle Solaris 10 zone is configured on an Oracle Solaris 11 domain.
If there are plans to add a root domain or I/O domain of Oracle Solaris 10 after the start of system operation, apply the rules for Oracle Solaris 10.
Note - For details on the design of control domain, root domain, and I/O domain configurations, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.

Top of Page