Skip to main content

Contents

  1. Preface
  2. Chapter 1 PCI Card Mounting Rules for the SPARC M10-1
    1. Click 1.1 Prerequisites
    2. Click 1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  1.3 Hardware Configuration Diagram
  3. Chapter 2 PCI Card Mounting Rules for the SPARC M10-4
    1. Click 2.1 Prerequisites
    2. Click 2.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  2.3 Relationship Between the CPU Configuration and the Number of Root Complexes
  4. Chapter 3 PCI Card Mounting Rules for the SPARC M10-4S
    1. Click 3.1 Prerequisites
    2. Click 3.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  3.3 Relationship Between the CPU Configuration and the Number of Root Complexes
  5. Chapter 4 Factory-Default Mounting Order of PCI Cards
  6. Appendix A Cards That Support PCI Hot Plug and Dynamic Reconfiguration
  7. Appendix B Cards That Support SR-IOV
  8. Appendix C Cards That Support Direct I/O
  9. Appendix D Cards That Support the Dynamic Reassignment Function for the PCIe End Point Device (PCIe Card)
  10. Appendix E Cards That Support EFI (GPT) Labeled Disks

2.1.2 System Firmware XCP Version


2.1.2 System Firmware XCP Version
The maximum number of each type of mounted PCI card and the slots available for mounting may vary depending on the system firmware version. For XCP 2050 or later, see the tables in "2.2.1 If XCP 2050 or Later is Used and Oracle Solaris 11 is Installed on All the Domains" and "2.2.2 If XCP 2050 or Later is Used and Oracle Solaris 10 is Installed on All the Domains or if XCP 2050 or Later is Used and Oracle Solaris 11 and Oracle Solaris 10 are Mixed" according to the Oracle Solaris version. For XCP 2044 or earlier, see "2.2.3 XCP 2044 or Earlier" regardless of the Oracle Solaris version.

Top of Page