Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide >
  9. 1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

Contents

  1. Preface
  2. Chapter 1 PCI Card Mounting Rules for the SPARC M10-1
    1. Click 1.1 Prerequisites
    2. Click 1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  1.3 Hardware Configuration Diagram
  3. Chapter 2 PCI Card Mounting Rules for the SPARC M10-4
    1. Click 2.1 Prerequisites
    2. Click 2.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  2.3 Relationship Between the CPU Configuration and the Number of Root Complexes
  4. Chapter 3 PCI Card Mounting Rules for the SPARC M10-4S
    1. Click 3.1 Prerequisites
    2. Click 3.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  3.3 Relationship Between the CPU Configuration and the Number of Root Complexes
  5. Chapter 4 Factory-Default Mounting Order of PCI Cards
  6. Appendix A Cards That Support PCI Hot Plug and Dynamic Reconfiguration
  7. Appendix B Cards That Support SR-IOV
  8. Appendix C Cards That Support Direct I/O
  9. Appendix D Cards That Support the Dynamic Reassignment Function for the PCIe End Point Device (PCIe Card)
  10. Appendix E Cards That Support EFI (GPT) Labeled Disks

1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots


1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
For the maximum number of each type of mounted PCI card and the available PCI slots, see Table 1-1 to Table 1-6 according to the domain OS version.
  1. "Maximum number mounted" in the tables means the maximum number of PCI cards that can be mounted in the SPARC M10-1 or PCI expansion unit. The numbers in parentheses indicate the slot numbers where cards can be mounted, among the PCI slots of the SPARC M10-1. If there are no parentheses, all of the slots are available for mounting. In any PCI expansion unit where cards can be mounted, all of the slots are available for mounting.
  2. The SPARC M10 has an I/O bandwidth of 8 GB/s (simplex) per root complex. The bandwidth between the PCI expansion unit and the SPARC M10 is also 8 GB/s. Therefore, if multiple PCI cards operating at the same time share that bandwidth, each PCI card may not demonstrate the maximum performance. If a high-speed communication card requires a certain level of performance, take the following measures to secure the bandwidth.
    - Mount the card in a PCI slot in the SPARC M10-1 instead of in an PCI expansion unit.

    - Avoid mounting another PCI card in a PCI slot of the same root complex.

Top of Page