Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 RCIL User Guide

1. Preface
2. Chapter 1　Overview of the Remote Power Management Function of SPARC M12 and SPARC M10
   1.  1.1　About the Remote Power Management Function for SPARC M12 and SPARC M10
   2.  1.2　Understanding the Forms of Connection for Remote Power Management
   3.  1.3　Remote Power Management Mechanism
3. Chapter 2　Basic Flow for Configuring Remote Power Management
   1.  2.1　Before Configuring Remote Power Management
   2.  2.2　Steps for Configuring Remote Power Management
      1. 2.2.1　Creating a Management File
      2. 2.2.2　Enabling/Disabling the IPMI Service Used for the Remote Power Management Function
      3. 2.2.3　Checking the Remote Power Management Settings
      4. 2.2.4　Initializing the Remote Power Management Settings
      5. 2.2.5　Enabling/Disabling the Remote Power Management Function
      6. 2.2.6　Setting a Remote Power Management Group
      7. 2.2.7　Acquiring the setting information on a remote power management group
4. Chapter 3　Examples of Remote Power Management Configuration
   1.  3.1　Configuring the Remote Power Management for the First Time
      1. 3.1.1　System That is Configured with a Host Node and an I/O Node
      2. 3.1.2　System That is Configured with a Host Node and a Remote Power Distribution Unit
      3. 3.1.3　System That is Configured with Multiple Host Nodes and a Remote Power Distribution Unit
      4. 3.1.4　System That is Configured with Host Nodes, in Which Physical Partitions (PPARs) are Specified as Subnodes, and a Remote Power Distribution Unit
      5. 3.1.5　System in Which Multiple Remote Power Management Groups are Set
   2.  3.2　Adding or Removing a Node in an Existing Remote Power Management Group
      1. 3.2.1　Adding an I/O Node
      2. 3.2.2　Adding a Host Node
      3. 3.2.3　Removing an I/O Node
      4. 3.2.4　Removing a Host Node
   3.  3.3　Maintaining an I/O Node
      1. 3.3.1　Maintaining an ETERNUS