Skip to main content

Contents

  1. Preface
  2. Chapter 1 PCI Card Mounting Rules for the SPARC M12-1
    1. Click 1.1 Prerequisites
    2.  1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  1.3 Hardware Configuration Diagram
  3. Chapter 2 PCI Card Mounting Rules for the SPARC M12-2
    1. Click 2.1 Prerequisites
    2.  2.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  2.3 Relationship Between the CPU Configuration and Number of Root Complexes
  4. Chapter 3 PCI Card Mounting Rules for the SPARC M12-2S
    1. Click 3.1 Prerequisites
    2.  3.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
    3.  3.3 Relationship Between the CPU Configuration and Number of Root Complexes
  5. Chapter 4 Factory-Default Mounting Order of PCI Cards
  6. Appendix A List of the Operating Environment of the PCI Cards
  7. Appendix B Cards That Support PCI Hot Plug and Dynamic Reconfiguration
  8. Appendix C Cards/On-Board Devices That Support SR-IOV
  9. Appendix D Cards/On-Board Devices That Support Assignment of PCIe End Point Devices (PCIe Cards)
  10. Appendix E Cards That Support EFI (GPT) Labeled Disks

1.3 Hardware Configuration Diagram


1.3 Hardware Configuration Diagram
Figure 1-1 is a hardware configuration diagram of the SPARC M12-1.
Figure 1-1  Hardware Configuration Diagram of the SPARC M12-1
Figure 1-1 Hardware Configuration Diagram of the SPARC M12-1

Top of Page