Skip to main content
Home
>
Products
>
Computing Products
>
Servers
>
Fujitsu SPARC servers
>
Downloads
>
User Manuals
>
Fujitsu SPARC M12 PCI Card Installation Guide
>
1.1 Prerequisites
Contents
Preface
Chapter 1 PCI Card Mounting Rules for the SPARC
M12-1
1.1 Prerequisites
1.1.1 Domain OS
1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
1.3 Hardware Configuration Diagram
Chapter 2 PCI Card Mounting Rules for the SPARC
M12-2
2.1 Prerequisites
2.1.1 Domain OS
2.1.2 Number of CPUs and Number of Root Complexes
2.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
2.3 Relationship Between the CPU Configuration and Number of Root Complexes
Chapter 3 PCI Card Mounting Rules for the SPARC
M12-2S
3.1 Prerequisites
3.1.1 Domain OS
3.1.2 Number of CPUs and Number of Root Complexes
3.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots
3.3 Relationship Between the CPU Configuration and Number of Root Complexes
Chapter 4 Factory-Default Mounting Order of PCI Cards
Appendix A List of the Operating Environment of the PCI Cards
Appendix B Cards That Support PCI Hot Plug and Dynamic Reconfiguration
Appendix C Cards/On-Board Devices That Support SR-IOV
Appendix D Cards/On-Board Devices That Support Assignment of PCIe End Point Devices (PCIe Cards)
Appendix E Cards That Support EFI (GPT) Labeled Disks
Table of contents
Glossary
1.1 Prerequisites
1.1 Prerequisites
Domain OS
<
Previous Page
|
Next Page
>
Top of Page