Skip to main content

Contents

  1. Preface
  2. Product Handling Precautions
  3. Chapter 1 Overview
    1.  1.1 Product and Model Names
    2.  1.2 Components
    3.  1.3 Appearance
    4.  1.4 Functions
    5.  1.5 Control Driver
    6.  1.6 Operating Environment
    7.  1.7 Status Indicator LEDs
  4. Chapter 2 Fujitsu 3.2 TB Flash Accelerator Card Installation
  5. Chapter 3 Fujitsu 3.2 TB Flash Accelerator Card Settings
    1.  3.1 Checking the Fujitsu 3.2 TB Flash Accelerator Card
    2.  3.2 Optimizing the Fujitsu 3.2 TB Flash Accelerator Card
    3.  3.3 Checking Various Information on the Fujitsu 3.2 TB Flash Accelerator Card
  6. Appendix A Precautions and Restrictions
    1.  A.1 Restrictions on Oracle VM Server for SPARC
    2.  A.2 Restrictions on PHP/PPAR DR and Active Replacement
    3.  A.3 Disk Label Precaution
    4.  A.4 LBA Format Precaution
    5. Click A.5 Precaution on OS Boot From FCode
    6. Click A.6 Precaution on Installing an OS on the Fujitsu 3.2 TB Flash Accelerator Card
    7.  A.7 Precaution on the nvmeadm namespace -v Command
    8.  A.8 Restriction on the -n Option of the nvmeadm Command
    9.  A.9 Precaution on the nvmeadm list -s Command
    10.  A.10 Restriction on probe-nvme-all
    11.  A.11 fwupdate Command Precaution
  7. Appendix B Specifications
    1.  B.1 Product Specifications
    2.  B.2 Physical Specifications
    3.  B.3 Environmental Specifications
    4.  B.4 Electrical Specifications
    5.  B.5 Performance Specifications
    6.  B.6 Reliability Specifications
  8. Appendix C Environmental Information
    1.  C.1 Taiwan RoHS Declarations
    2.  C.2 China RoHS Declarations
    3.  C.3 For Indian e-waste Rules

A.5.2 Corrective Action After Occurrence


A.5.2 Corrective Action After Occurrence
If the system does not stop at the ok prompt, apply break to the target domain to stop at an ok prompt. After 15 minutes have passed, execute the boot command again.

Top of Page