Skip to main content

A.2.1 Checking the Component Status


A.2.1 Checking the Component Status
Use the showhardconf command to check the status of each field replaceable unit (FRU). The displayed information is as follows:
  1. Current configuration and status
  2. Quantities of mounted FRUs by FRU type, such as CPU, memory, and PCIe card
  3. Physical partition (PPAR) information
  4. PCI expansion unit information (displayed only when the power to the physical partition is on)
  5. PCIe card information (displayed only when the power to the physical partition is on)
showhardconf command
Use the showhardconf command to check the system hardware configuration and the status of each component.
A displayed asterisk (*) indicates the fault location of a unit where a failure or degradation occurred.
Status displays the following statuses.
  1. Faulted: Non-operational status of the relevant component due to failure
  2. Degraded: A part of the unit has failed, but the unit continues in operation.
  3. Deconfigured: Including its components on the lower layers, the unit is in a normal condition, but it has been degraded due to the influence of a failure or degradation of another unit.
  4. Maintenance: Maintenance work in progress. The replacefru command is in operation.
  5. Normal: Normal status
Example: SPARC M12-2 display example
XSCF> showhardconf -M
SPARC M12-2;
+ Serial:PZ51618006; Operator_Panel_Switch:Service;
   *1 System serial number

+ System_Power:Off; System_Phase:Cabinet Power Off;
BB#00 Status:Normal; Role:Master; Ver:300ah; Serial:PZ51618006;
                         *1 SPARC M12-2 serial number

+ FRU-Part-Number:CA20369-B17X 003AB/9999999 ;
+ Power_Supply_System: ;
+ Memory_Size:256 GB;
CMUL Status:Normal; Ver:1101h; Serial:PP1617010W ;
+ FRU-Part-Number:CA07855-D201 A1 /9999999 ;
+ Memory_Size:128 GB; Type: C ;
CPU#0 Status:Normal; Ver:4241h; Serial:00000063;
+ Freq:3.900 GHz; Type:0x20;
+ Core:12; Strand:8;
MEM#00A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D7204;
+ Type:83; Size:16 GB;
MEM#01A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6CC7;
+ Type:83; Size:16 GB;
MEM#02A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6CCB;
+ Type:83; Size:16 GB;
MEM#03A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6CC5;
+ Type:83; Size:16 GB;
MEM#04A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6C70;
+ Type:83; Size:16 GB;
MEM#05A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6C89;
+ Type:83; Size:16 GB;
MEM#06A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6CC4;
+ Type:83; Size:16 GB;
MEM#07A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6CB7;
+ Type:83; Size:16 GB;
CMUU Status:Normal; Ver:1101h; Serial:PP1617011E ;
+ FRU-Part-Number:CA07855-D401 A1 /9999999 ;
+ Memory_Size:128 GB; Type: C ;
CPU#0 Status:Normal; Ver:4241h; Serial:00000031;
+ Freq:3.900 GHz; Type:0x20;
+ Core:12; Strand:8;
MEM#00A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D5B24;
+ Type:83; Size:16 GB;
MEM#01A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6724;
+ Type:83; Size:16 GB;
MEM#02A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D5B25;
+ Type:83; Size:16 GB;
MEM#03A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D66DE;
+ Type:83; Size:16 GB;
MEM#04A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D6559;
+ Type:83; Size:16 GB;
MEM#05A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D5A7A;
+ Type:83; Size:16 GB;
MEM#06A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D5A82;
+ Type:83; Size:16 GB;
MEM#07A Status:Normal;
+ Code:ce8002M393A2K40BB1-CRC 00-316D5ADC;
+ Type:83; Size:16 GB;
XSCFU Status:Normal; Ver:0101h; Serial:PP161401KP ;
+ FRU-Part-Number:CA20369-B08X 002AB/9999999 ;
+ Type: A ;
OPNL Status:Normal; Ver:0101h; Serial:PP1615002R ;
+ FRU-Part-Number:CA20365-B35X 005AC/7060922 ;
+ Type: A ;
PSUBP Status:Normal; Ver:1101h; Serial:PP161501EC ;
+ FRU-Part-Number:CA20369-B17X 003AB/9999999 ;
+ Type: C ;
PSU#0 Status:Normal; Ver:303242h; Serial:HWCD1622000551;
+ FRU-Part-Number:CA01022-0850/7334651 ;
+ Power_Status:ON; AC:200 V; Type: C ;
PSU#1 Status:Normal; Ver:303242h; Serial:HWCD1622000586;
+ FRU-Part-Number:CA01022-0850/7334651 ;
+ Power_Status:ON; AC:200 V; Type: C ;
PSU#2 Status:Normal; Ver:303242h; Serial:HWCD1622000524;
+ FRU-Part-Number:CA01022-0850/7334651 ;
+ Power_Status:ON; AC:200 V; Type: C ;
PSU#3 Status:Normal; Ver:303242h; Serial:HWCD1622000496;
+ FRU-Part-Number:CA01022-0850/7334651 ;
+ Power_Status:ON; AC:200 V; Type: C ;
FANU#0 Status:Normal; Type: C ;
FANU#1 Status:Normal; Type: C ;
FANU#2 Status:Normal; Type: C ;
FANU#3 Status:Normal; Type: C ;
FANU#4 Status:Normal; Type: C ;
FANU#5 Status:Normal; Type: C ;
FANU#6 Status:Normal; Type: C ;
FANU#7 Status:Normal; Type: C ;
HDDBP Status:Normal; Type: A ;
showhardconf -u command
Use the showhardconf command with the -u option to display the quantity of each type of mounted field replaceable unit.
The CPU modules are displayed with the operating frequency, and the memory units are displayed with the capacity per memory. If the option is omitted, the command displays the current configuration information, status information, and physical partition (PPAR) information for each field replaceable unit.
Example: SPARC M12-2 display example
XSCF> showhardconf -u
SPARC M12-2; Memory_Size:256 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| BB | 1 |
| CMUL | 1 |
| Type:C | ( 1) |
| CPU | 1 |
| Freq:3.900 GHz; | ( 1) |
| MEM | 8 |
| Type:83; Size:16 GB; | ( 8) |
| CMUU | 1 |
| Type:C | ( 1) |
| CPU | 1 |
| Freq:3.900 GHz; | ( 1) |
| MEM | 8 |
| Type:83; Size:16 GB; | ( 8) |
| PCICARD | 0 |
| LINKCARD | 0 |
| PCIBOX | 0 |
| IOB | 0 |
| LINKBOARD | 0 |
| PCI | 0 |
| FANBP | 0 |
| PSU | 0 |
| FAN | 0 |
| XBU | 0 |
| XSCFU | 1 |
| Type:A | ( 1) |
| OPNL | 1 |
| Type:A | ( 1) |
| PSUBP | 1 |
| Type:C | ( 1) |
| PSU | 4 |
| Type:C | ( 4) |
| FANU | 8 |
| HDDBP | 1 |
| XBBOX | 0 |
| XBU | 0 |
| XSCFU | 0 |
| OPNL | 0 |
| XBBPU | 0 |
| XSCFIFU | 0 |
| PSU | 0 |
| FANU | 0 |
+-----------------------------------+------------+