FUJITSU

SPARC Enterprise M9000 Power Calculator

SPARC Enterprise M9000 Power Calculator ("Tool") provides sample power consumption values for your planned SPARC Enterprise M9000 configuration.
If you do not agree with any of the terms and conditions, do not use this Tool.

TERMS AND CONDITIONS

Fujitsu Limited ("Fujitsu") gives you the right to use the Tool solely for calculating power consumption for a single system configuration. Results obtained through the use of the Tool are estimation of power consumption in your environment and Fujitsu will not warrant accuracy of the results.

Power Calculator

Please select the required components and then click "Calculate."
Please use this site for SPARC Enterprise M9000 with expansion cabinet.

Item Quantity
CPU/Memory Board (CMU)

Up to 4 CPU and 32 DIMM can be mounted per CMU

CMU CPU SPARC64 VII+ 3.00GHz (1 chip/4 core)
SPARC64 VII 2.88GHz (1 chip/4 core)
SPARC64 VII 2.52GHz (1 chip/4 core)
SPARC64 VI 2.4GHz (1 chip/2 core)
SPARC64 VI 2.28GHz (1 chip/2 core)
Memory 8GB DIMM
4GB DIMM
2GB DIMM
1GB DIMM
I/O Board (IOU)

Up to 4 Internal disk drive and 8 PCI card can be mounted per IOU

IOU Internal Disk
/SSD
600GB SAS HDD
300GB SAS HDD
146GB SAS HDD
73GB SAS HDD
200GB SAS SSD
100GB SAS SSD
PCI Card
Internal DAT drive

Output

Sample power  kW
System Workload  %

Use the bar to adjust system workload (0 to 100%)

Notes

  • This tool provides sample power consumption values for SPARC Enterprise configurations. It estimates the power consumption for your chosen planned configuration under specific operational conditions. Please only use these calculated values as estimations.
    Power consumption will differ from the actual value shown depending on server load, application, environment, and other factors. For precise results, actual measurements based upon the exact conditions as occur at your operational site are recommended.
  • Please note that discontinued products might be included in such configurations and units may differ from those in actual use. Please contact your Fujitsu sales representative for available configurations.
  • The Tool and information obtained by the Tool may be changed or updated without prior notification.
  • In no event shall Fujitsu be liable for any direct, indirect damages arising from the use of the Tool or caused by or in relation to the Tool.