Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2410 >
  9. Notes on Updating a SPARC M10 System to Oracle Solaris 11.2 or Later

Notes on Updating a SPARC M10 System to Oracle Solaris 11.2 or Later


Notes on Updating a SPARC M10 System to Oracle Solaris 11.2 or Later
Notes on Enabling MPxIO
The device path name of an internal SAS disk or an SSD may be changed when Oracle Solaris 11.1 is updated to Oracle Solaris 11.2 or later. You can start Oracle Solaris even when the device path name is changed. However, if any application or backup software specifies the device path name of the internal SAS disk or the SSD directly, the device path may not be available for reference.
Cause
The cause of this is that updating from Oracle Solaris 11.1 to Oracle Solaris 11.2 changes the default MPxIO setting of the internal SAS disk or the SSD from disabled to enabled. For the target disks, see Table 3-2. For an example of a device path change, see Table 3-3.
Table 3-2  Default MPxIO Setting on an Internal SAS Disk and SSD
Product Name Vendor Name Default MPxIO Setting
Fujitsu/Oracle Model Name Product Name Oracle Solaris 10 1/13 Oracle Solaris 11.1 Oracle Solaris 11.2 or Later
600GB SAS
disk drive
TOSHIBA Disabled Disabled Enabled
SPME3A11*/
7105508, 7106318 (*1)
7105571, 7106322 (*2)
MBF2600RC
AL13SEB600
AL13SEB600AL14SE
AL13SEB600AL15SE
     
900GB SAS
disk drive
TOSHIBA Disabled Disabled Disabled
SPME3B11*/
7111257, 7111260 (*1)
7111261, 7111262 (*2)
AL13SEB900
AL13SEB900AL14SE
AL13SEB900AL15SE
     
1.2TB SAS
disk drive
TOSHIBA Disabled  Disabled  Disabled 
SPME3C11*/
7120206, 7120207 (*1)
7120208, 7120209 (*2)
AL15SE12NFUJ1.2T      
100GB SAS SSD TOSHIBA Disabled Disabled Enabled
SPME3Y11*/
7105509, 7106319 (*1)
7105572, 7106323 (*2)
MK1001GRZB      
200GB SAS SSD TOSHIBA Disabled Disabled Enabled
SPME3Y21*/
7105510, 7106320 (*1)
7105573, 7106324 (*2)
MK2001GRZB      
200GB SAS SSD TOSHIBA Disabled Disabled Disabled
SPME3Y22*/
7107810, 7107814 (*1)
7107811, 7107815 (*2)
PX02SMF020      
400GB SAS SSD TOSHIBA Disabled Disabled Disabled
SPME3Y31*/
7107812, 7107816 (*1)
7107813, 7107817 (*2)
PX02SMF040      
400GB SAS SSD TOSHIBA Disabled Disabled Disabled
SPME3Y32*/
7115093, 7115094 (*1)
7115095, 7115096 (*2)
PX04SMB04FUJ400G      
400GB SAS SSD SEAGATE Disabled Disabled Disabled
SPME3Y33*/
7604145 (*1)
7604146 (*2)
XS400ME70084      
800GB SAS SSD TOSHIBA Disabled Disabled Disabled
SPME3Y41*/
7119191, 7119192 (*1)
7119187, 7119188 (*2)
PX04SMB08FUJ800G      
800GB SAS SSD SEAGATE Disabled Disabled Disabled
SPME3Y42*/
7604147 (*1)
7604148 (*2)
XS800ME70084      
*1 These are factory default drives.
*2 These are used for expansion in the field.
Table 3-3  Examples of the Device Path Change Before and After MPxIO Enabling
  Device Path Name Before MPxIO is Enabled Device Path Name After MPxIO is Enabled
Physical device path name /pci@8800/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000394281b5312,0 /scsi_vhci/disk@g50000394281b5310
Logical device path name /dev/rdsk/c2t50000394281B5312d0 /dev/rdsk/c0t50000394281b5310d0
Note that a device path name is not changed if MPxIO of an internal SAS disk or an SSD of the SPARC M10 system is enabled manually before updating to Oracle Solaris 11.2.
Corrective Action
Take the following actions after updating to Oracle Solaris 11.2.
- When the physical device path name can be changed
Confirm the physical device path name by using the procedure shown in Procedure for Confirming the Device Path. Change the device path of the internal SAS disk or SSD directly specified in backup software or application programs to the confirmed device path name.
- When the physical device path name cannot be changed
Execute the following command, and forcibly disable the MPxIO setting of the internal SAS disk and SSD. 
# stmsboot -D mpt_sas -d
Procedure for Confirming the Device Path
In the following procedure, you can confirm the device path name, vendor name, product name, and enabled/disabled state of MPxIO of the internal SAS disk or SSD in the SPARC M10. If MPxIO is already enabled, the character string "scsi_vhci" appears in the physical device path name of the internal SAS disk or SSD.
- Display example when MPxIO for an internal disk is enabled

The physical device path name includes the character string "scsi_vhci". So, MPxIO is enabled.

The format command omits a part of the logical device path name to display. The actual name of the logical device path is the path name with "/dev/rdsk" added.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t50000394281b5310d0 <TOSHIBA-MBF2600RC- 3706 cyl 64986 alt 2 hd 27 sec 668>

Logical device path name Vendor name Product name
/scsi_vhci/disk@g50000394281b5310
Physical device path name
/dev/chassis/FUJITSU-BBEXP. 500000e0e06d31bf/03N0_HDD00/disk
- Display example when MPxIO for an internal disk is not enabled

The physical device path name does not include the character string "scsi_vhci". So, MPxIO is disabled.

The format command omits a part of the logical device path name to display. The actual name of the logical device path is the path name with "/dev/rdsk" added.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c2t50000394281B5312d0 <TOSHIBA-MBF2600RC-3706 cyl 64986 alt 2 hd 27 sec 668>

Logical device path name Vendor name Product name
/pci@8800/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000394281b5312,0
Physical device path name
/dev/chassis/FUJITSU-BBEXP. 500000e0e06d31bf/03N0_HDD00/disk
Notes on Boot Environment Switching by beadm
Boot environment switching with the beadm command or with the pkg command may fail with the output of an error message where Oracle Solaris 11.1 or later is installed on an internal SAS disk or SSD.
- Message example 1
# beadm activate S11U1SRU20B04-z_stress-2.10-1
Error while accessing "/dev/rdsk/c2t500003942823F352d0s0":
No such file or directory
Unable to activate S11U1SRU20B04-z_stress-2.10-1.
Error installing boot files.
- Message example 2
# beadm activate S11U1SRU20B04-z_stress-2.10-1
....

Error while accessing "/dev/rdsk/c2t500003942823F352d0s0":
No such file or directory
Unable to activate S11U1SRU20B04-z_stress-2.10-1.
Error installing boot files.
....
Cause
This occurs because the MPxIO device path is not properly inherited by beadm or pkg when the internal SAS disk or SSD is made into a multipath type (MPxIO).
Corrective Action
Execute the following command, and then execute the boot environment switching command again.
# /usr/sbin/zpool status