Skip to main content

Notes on Rebooting the XSCF 


Notes on Rebooting the XSCF 
  1. The following warning message may be output to the control domain console when executing rebootxscf(8).
PICL snmpplugin: cannot fetch object value (err=5, OID=<1.3.6.1.2.1.47.1.4.1>, row=0)
  1. If the cluster software is in use when executing rebootxscf(8), the following warning message may be output to the logical domain console. 
SA SA_xscf***.so to test host *** failed
7240 Connection to the XSCF is refused. (node:*** ipadress:*** detail:***)
  1. If the rebootxscf(8) command is executed while remote storage is connected, access to the media encounters an error.
FRU: /BB#0/REMOTE_STORAGE
Msg: I/O device error detected

FRU: /BB#0/REMOTE_STORAGE
Msg: Boot process failed

FRU: /REMOTE_STORAGE
Msg: FCode informed error

FRU: /BB#1/REMOTE_STORAGE
Msg: A:sd1:sd:SCSI transport failed (DRIVE vendor=Fujitsu, product=Remote Storage)
(compdev=c8t0d0)

FRU: /REMOTE_STORAGE
Msg: A:sd0:sd:Device Error(Media Error) (DRIVE vendor=Fujitsu, product=Remote Storage)
(compdev=c5t0d0)

FRU: /BB#0/REMOTE_STORAGE
Msg: The Machine Administration detected a other hard disk failure.