Errors

Error codeMeaning
20000Unspecified error occurred.
20001No supported hardware found.
20002Invalid command.
20003Vendor API call failed.
20004Invalid property.
20005Invalid operation.
20006Invalid parameter.
20007Memory allocation failed.
20008Invalid object ID.
20009Invalid object type.
20010Property type / value mismatch.
20011Lock initialization failed.
20012Vendor API initialization failed.
20013Event initialization failed.
20014Configuration key/value pair not found.
20015Library loading failed.
20016Library symbol not found.
20017MPX initialization in progress.
20018Write access denied.
20019Consistency check not supported with this RAID level.
20020Logical drive busy.
20021Consistency check not suspended.
20022Consistency check not running.
20023Rebuild not supported with this RAID level.
20024Logical drive not operational.
20025Rebuild not running.
20026Rebuild not suspended.
20027Could not write, the file already exists.
20028Invalid charcacters in filename.
20029Could not open file.
20030Can only start in manual mode.
20031Adapter busy.
20032No disks found.
20033Patrol Read start in progress.
20034Patrol Read not running.
20035Alarm disabled.
20036Recalibration not needed.
20037Recalibration not running.
20038Initialization not running.
20039No BGI running.
20040Location running.
20041Location not running.
20042Disk not available.
20043Disk not hot spare.
20044Disk failed.
20045Reboot required.
20046Disk(s) too small.
20047Not enough disk(s) specified.
20048Resulting disk space too small.
20049No logical drive found.
20050Disk not online.
20051Disk not offline.
20052Logical drive not offline.
20053Migration not running.
20054Disk busy.
20055Verification not running.
20056Parse error.
20057Configuration mismatch.
20058Logical drive not degraded.
20059Disk missing.
20060Selected Segment/drive not usable for the new logical drive.
20061All segments of a logical drive must be attached to the same channel/port.
20062All segments of a logical drive must be attached to the same array.
20063The maximum logical drive count per channel/port is limited.
20064The maximum logical drive count is limited.
20065Not enough disks to create a logical drive.
20066Too many disks to create a logical drive.
20067Logical drive not creatable.
20068Disks too small to create the logical drive.
20069Estimated segment size is smaller than minimum supported segment size.
20070Segment is too small for the logical drive.
20071Add drives for creating a logical drive.
20072All arrays full.
20073Invalid number of arrays.
20074No unconfigured disks.
20075All arrays full and/or no unconfigured disks.
20076Invalid number of disks.
20077No space on disk.
20078Disk already in use.
20079Disk not available.
20080Invalid disks specified for array.
20081Invalid span depth.
20082Invalid arrays for span depth.
20083Invalid array count.
20084Invalid array reference.
20085Invalid size.
20086Invalid logical drive count.
20087Target IDs exhausted.
20088Invalid RAID level.
20089Invalid hot spare count.
20090Spanning not possible.
20091Number of spans exhausted.
20092Number of drives per span exhausted.
20093No configuration available.
20094Specified size too small.
20095Maximum number of drives to create the disk reached.
20096Segment is too large for the logical drive.
20097Previous span must use its full capacity if further spans need to be created.
20098Current span will be too large to add the disk.
20099Other span is too large to add the disk.
20100The supported stripe size depends on the number of disks used.
20101This stripe size is too large for the number of disks in the logical drive.
20102There are segments which can never be used for another logical drive.
20103Alarm not available.
20104Patrol Read disabled.
20105Patrol Read running.
20106Migration running.
20107Initialization running.
20108Consistency check running.
20109Not enough disks for migration.
20110Disk cannot guard any logical drive as hot spare.
20111MDC running.
20112MDC not supported with this RAID level.
20113MDC not running.
20114MDC not suspended.
20115Recalibration running.
20116Different disk types in logical drive not supported.
20117Different disk types in enclosure not supported.
20118Hotplug of enclosures not supported.
20119It is not possible to import this foreign configuration, it can be cleared only.
20120Clear of foreign configuration failed.
20121Timeout
20122Different disk media types in logical drive not supported.
20123Disk cannot be used for configuration.
20124Currently the action can not be performed. It will be tried to start the action later.
20125The service is shutting down.
20126Too many instances are already running.
20127Only stripe sizes above 8K are allowed for this RAID level with 3 disks per span.
20128Plugin busy.
20129BBU busy.
20130Port busy.
20131Enclosure busy.
20132Processor busy.
20133Foreign configuration incomplete. Try different index or clear this configuration.
20134Disk used by LMD
20135No hardware with supported firmware found.
20136Unexpected error code.
20137Service not available.
20138Send / receive failed.
20139gethostname() failed.
20140Not implemented.
20141Action not executed.
20142Error during processing.
20143Mailbox unavailable.
20144Invalid mailbox name.
20145Bad command sequence.
20146User not local.
20147Transaction failed.
20148Authentication not supported.
20149Encryption required for requested authentication mechanism.
20150Authentication mechanism is too weak.
20151A password transition is needed.
20152TLS not available on server for temporary reason.
20153TLS not supported by server.
20154Connection refused.
20155Bad username or password.
20156Could not open TLS socket.
20157Undefined recipient mail.
20158Need at least one recipient.
20159No sender.
20160No message subject.
20161No more connections to servers supported.
20162Could not connect to server.
20163No or invalid response from server.
20164Logical drive not initialized.
20165Initialization not suspended.
20166CacheCade supports SSD's only.
20167No trial software options found.