Capacitors
RE series Dimensions, Packing
1. Dimensions
Dimensions [Unit : mm]
| Φd×L | Φd | P | α |
|---|---|---|---|
| Φ4×5.0 | 0.45 | 1.5 | 1.0 |
| Φ5×10.0 | 0.5 | 2.0 | 1.0 |
| Φ6.3×7.0 | 0.45 | 2.5 | 1.0 |
| Φ6.3×8.0 | 0.6 | 2.5 | 1.0 |
| Φ6.3×10.0 | 0.6 *1) | 2.5 | 1.0 |
| Φ8×8.0 | 0.6 | 3.5 | 1.0 |
| Φ8×11.5 | 0.6 | 3.5 | 1.5 |
| Φ10×10.5 | 0.6 | 5.0 | 1.0 |
| Φ10×12.5 | 0.6 | 5.0 | 1.5 |
*1) NU Type (Φ6.3×10.0) Φd=0.5mm
2. Specification of packing
2-1. Bulk packing
Packing quantity
| Size of parts | Quantity (pcs) |
|---|---|
| Φ4×5.0 Φ5×10.0 |
200 |
| Φ6.3×7.0 Φ6.3×8.0 Φ6.3×10.0 |
200 |
| Φ8×8.0 Φ8×11.5 |
100 or 200 |
| Φ10×10.5 Φ10×12.5 |
100 or 200 |
2-2. Taping and packing
Ammo pack and dimensions [Unit : mm]
The lid of feeding side of the taping box shall be torn off at the perforation line.
Ammo pack and packing quantity
| Size of parts | Quantity (pcs) |
|---|---|
| Φ4×5.0 Φ5×10.0 |
2,000 |
| Φ6.3×7.0 Φ6.3×8.0 Φ6.3×10.0 |
2,000 |
| Φ8×8.0 Φ8×11.5 |
1,000 |
| Φ10×10.5 Φ10×12.5 |
500 |
3. Detailed taping specification
3-1. Taping specifications to Φ4×5.0 and Φ5×10.0 for straight lead
3-2. Taping specifications to Φ4×5.0 and Φ5×10.0 for straight lead
3-3. Taping specifications to Φ6.3×7.0, Φ6.3×8.0 and Φ6.3×10.0 for straight lead
3-4. Taping specifications to Φ6.3×7.0, Φ6.3×8.0 and Φ6.3×10.0 for formed lead
3-5. Taping specifications to Φ8×8.0 and Φ8×11.5 for formed lead
3-6. Taping specifications to Φ8×8.0 and Φ8×11.5 for straight lead
3-7. Taping specifications to Φ10×10.5 and Φ10×12.5 for straight lead
3-8. Taping specifications to Φ4/Φ5 [Unit : mm]
| Item | ΦD | Φ4/Φ5 | Φ4/Φ5 | Tolerance | ||
|---|---|---|---|---|---|---|
| Lead Symbol | Symbol | J | P | - | ||
| Lead wire interval | f | 2.5 | 5.0 | +0.8, -0.2 | ||
| Components diameter | D | Φ4 | Φ5 | Φ4 | Φ5 | +0.5max |
| Components length | L | 5.0 | 10.0 | 5.0 | 10.0 | +1.0max |
| Lead wire diameter | d | 0.45 | 0.50 | 0.45 | 0.50 | ±0.05 |
| Pitch between components | P | 12.7 | 12.7 | ±1.0 | ||
| Feed holes position gap | P1 | 12.7 | 12.7 | ±0.3 | ||
| Feed holes position gap | P2 | 6.35 | 6.35 | ±1.0 | ||
| Feed holes position gap | P3 | 5.1 | 3.85 | ±0.7 | ||
| Base tape | W | 18.0 | 18.0 | +1.0, -0.5 | ||
| Adhesive tape | W0 | 8.5 | 8.5 | min | ||
| Feed holes position gap | W1 | 9.0 | 9.0 | ±0.5 | ||
| Adhesive tape gap | W2 | 3.0 | 3.0 | max | ||
| Lead wire clinch height | H0 | 16.0 | 16.0 | ±0.5 | ||
| Components height | H | 17.5 | 17.5 | ±0.5 | ||
| Cut position of interior components | h | 0 | 0 | - | ||
| Components alignment | △h1 | 2 | 2 | max | ||
| Components alignment | △h2 | 2 | 2 | max | ||
| Feed hole diameter | D0 | 4.0 | 4.0 | ±0.2 | ||
| Tape thickness | t | 0.7 | 0.7 | ±0.2 | ||
| Hold-Down tape gap | e | 11.0 | 11.0 | max | ||
3-9. Taping specifications to Φ6.3 [Unit : mm]
| Item | ΦD | Φ6.3 | Φ6.3 | Tolerance | ||||
|---|---|---|---|---|---|---|---|---|
| Lead Symbol | Symbol | JT | J | P | - | |||
| Lead wire interval | f | 2.5 | 5.0 | +0.8，-0.2(*1) | ||||
| Components diameter | D | Φ6.3 | Φ6.3 | +0.5max | ||||
| Components length | L | 7.0 | 8.0 | 10.0 | 7.0 | 8.0 | 10.0 | +1.0max |
| Lead wire diameter | d | 0.45 | 0.60 | 0.60(*2) | 0.45 | 0.60 | 0.60(*2) | ±0.05 |
| Pitch between components | P | 12.7 | 12.7 | ±1.0 | ||||
| Feed holes position gap | P1 | 12.7 | 12.7 | ±0.3 | ||||
| Feed holes position gap | P2 | 6.35 | 6.35 | ±1.0 | ||||
| Feed holes position gap | P3 | 5.1 | 3.85 | ±0.7(*3) | ||||
| Base tape | W | 18.0 | 18.0 | +1.0, -0.5 | ||||
| Adhesive tape | W0 | 8.5 | 8.5 | min | ||||
| Feed holes position gap | W1 | 9.0 | 9.0 | ±0.5 | ||||
| Adhesive tape gap | W2 | 2.0 | 3.0 | max | ||||
| Lead wire clinch height | H0 | - | 16.0 | ±0.5 | ||||
| Components height | H | 18.5 | 17.5 | ±0.5 | ||||
| Cut position of interior components | h | 0 | 0 | - | ||||
| Components alignment | △h1 | 2 | 2 | max | ||||
| Components alignment | △h2 | 2 | 2 | max | ||||
| Feed hole diameter | D0 | 4.0 | 4.0 | ±0.2 | ||||
| Tape thickness | t | 0.7 | 0.7 | ±0.2 | ||||
| Hold-Down tape gap | e | 11.0 | 11.0 | max | ||||
3-10. Taping specifications to Φ8 and Φ10 [Unit : mm]
| Item | ΦD | Φ8 | Φ10 | Tolerance | |
|---|---|---|---|---|---|
| Lead Symbol | Symbol | P | K | PH | - |
| Lead wire interval | f | 5.0 | 3.5 | 5.0 | +0.8, -0.2 |
| Components diameter | D | Φ8 | Φ8 | Φ10 | +0.5max |
| Components length | L | 8.0/11.5 | 8.0/11.5 | 10.5/12.5 | +1.5max(*4) |
| Lead wire diameter | d | 0.6 | 0.6 | 0.6 | ±0.05 |
| Pitch between components | P | 12.7 | 12.7 | 12.7 | ±1.0 |
| Feed holes position gap | P1 | 12.7 | 12.7 | 12.7 | ±0.3 |
| Feed holes position gap | P2 | 6.35(*5) | 6.35 | 6.35 | ±0.5(*5) |
| Feed holes position gap | P3 | 3.85(*6) | 4.6 | 3.85 | ±0.5(*6) |
| Base tape | W | 18.0 | 18.0 | 18.0 | +1.0, -0.5 |
| Adhesive tape | W0 | 8.5 | 8.5 | 8.5 | min |
| Feed holes position gap | W1 | 9.0 | 9.0 | 9.0 | ±0.5 |
| Adhesive tape gap | W2 | 2.0 | 3.0 | 3.0 | max |
| Lead wire clinch height | H0 | 16.0 | - | - | ±0.5 |
| Components height | H | 20.0(*7) | 20.0 | 18.5 | ±0.5(*7) |
| Cut position of interior components | h | 0 | 0 | 0 | - |
| Components alignment | △h1 | 2 | 2 | 2 | max |
| Components alignment | △h2 | 2 | 2 | 2 | max |
| Feed hole diameter | D0 | 4.0 | 4.0 | 4.0 | ±0.2 |
| Tape thickness | t | 0.7 | 0.7 | 0.7 | ±0.2 |
| Hold-Down tape gap | e | 11.0 | 11.0 | 11.0 | max |
4. Detailed Lead cutting specification
4-1. Lead cutting specification
| Item | ΦD | Φ4 | Φ5 | Φ6.3 | Φ8 | Φ10 | Tolerance |
|---|---|---|---|---|---|---|---|
| Lead Symbol | Symbol | CG | - | ||||
| Lead wire Length | H | 3.1 | ±0.3 | ||||
| Components diameter | D | Φ4 | Φ5 | Φ6.3 | Φ8 | Φ10 | +0.5Max |
| Components length | L | 5 | 10 | 7/8/10 | 8/11.5(*8) | 10.5/12.5(*8) | +1.0Max |
| Lead wire diameter | d | Φ0.45 | Φ0.5 | Φ0.45/Φ0.6/Φ0.6(*2) | Φ0.6 | Φ0.6 | ±0.05 |
| Lead wire interval | F | 1.5 | 2.0 | 2.5 | 3.5 | 5.0 | ±0.5 |
4-2. Kinked cutting specification
| Item | ΦD | Φ4 | Φ5 | Φ6.3 | Φ8 | Φ10 | Tolerance |
|---|---|---|---|---|---|---|---|
| Lead Symbol | Symbol | F | - | ||||
| Lead wire Length | H | 3.2 | ±0.5 | ||||
| Lead wire clinch Length | n | 1.7 | ±0.5 | ||||
| Lead wire clinch width | T | 2.2 | ±0.5 | ||||
| Lead wire clinch width (one lead) | S | 1.3 | ±0.15 | ||||
| Components diameter | D | Φ4 | Φ5 | Φ6.3 | Φ8 | Φ10 | +0.5Max |
| Components length | L | 5 | 10 | 7/8/10 | 8/11.5(*8) | 10.5/12.5(*8) | +1.0Max |
| Lead wire diameter | d | Φ0.45 | Φ0.5 | Φ0.45/Φ0.6/Φ0.6(*2) | Φ0.6 | Φ0.6 | ±0.05 |
| Lead wire interval | f | 1.5 | 2.0 | 2.5 | 3.5 | 5.0 | ±0.5 |
- *1
- f=2.5: ±0.5
- *2
- NU Type Φd=0.5mm
- *3
- P3=5.1: ±0.5
- *4
- L=8/10.5: +1.0Max
- *5
- Tolerance: ±1.0
- *6
- Tolerance: ±0.7
- *7
- Tolerance: ±0.75
- *8
- +1.5Max
Capacitors
ME series Dimensions, Packing
1. Dimensions
Dimensions [Unit : mm]
| Φd×L | W | H | C | R | P |
|---|---|---|---|---|---|
| Φ4×5.2 | 4.3 | 4.3 | 5.1 | 0.5～0.8 | 1.0 |
| Φ5×5.7 | 5.3 | 5.3 | 5.9 | 0.5～0.8 | 1.4 |
| Φ6.3×5.7 | 6.5 | 6.5 | 7.2 | 0.5～0.8 | 2.1 |
| Φ6.3×7.7 | 6.5 | 6.5 | 7.2 | 0.5～0.8 | 2.1 |
| Φ8×6.7 | 8.3 | 8.3 | 9.0 | 0.8～1.1 | 3.2 |
| Φ8×7.7 | 8.3 | 8.3 | 9.0 | 0.8～1.1 | 3.2 |
| Φ8×11.7 | 8.3 | 8.3 | 9.0 | 0.8～1.1 | 3.2 |
| Φ10×7.7 | 10.3 | 10.3 | 11.0 | 0.8～1.1 | 4.6 |
| Φ10×12.4 | 10.3 | 10.3 | 11.0 | 0.8～1.1 | 4.6 |
2. Specification of packing
Ammo pack and packing quantity
| Case size | Quantity (pcs) |
|---|---|
| Φ4×5.2 | 2000 |
| Φ5×5.7 | 1000 |
| Φ6.3×5.7 | 1000 |
| Φ6.3×7.7 | 900 |
| Φ8×6.7 | 1000 |
| Φ8×7.7 | 900 |
| Φ8×11.7 | 500 |
| Φ10×7.7 | 500 |
| Φ10×12.4 | 400 |
3. Specifications of taping
3-1. Embossed carrier tape dimensions
3-2. Reel dimension
3-3. Carrier tape dimension [Unit: mm]
| Case size | A ±0.2 |
B ±0.2 |
W ±0.3 |
F ±0.1 |
E ±0.1 |
P ±0.1 |
t ±0.1 |
T ±0.2 |
|---|---|---|---|---|---|---|---|---|
| Φ4×5.2 | 4.7 | 4.7 | 12.0 | 5.5 | 1.75 | 8.0 | 0.4 | 5.8 |
| Φ5×5.7 | 5.7 | 5.7 | 12.0 | 5.5 | 1.75 | 12.0 | 0.4 | 6.0 |
| Φ6.3×5.7 | 7.0 | 7.0 | 16.0 | 7.5 | 1.75 | 12.0 | 0.4 | 6.2 |
| Φ6.3×7.7 | 7.0 | 7.0 | 16.0 | 7.5 | 1.75 | 12.0 | 0.4 | 8.2 |
| Φ8×6.7 | 8.7 | 8.7 | 24.0 | 11.5 | 1.75 | 12.0 | 0.4 | 7.2 |
| Φ8×7.7 | 8.7 | 8.7 | 24.0 | 11.5 | 1.75 | 12.0 | 0.4 | 8.2 |
| Φ8×11.7 | 8.7 | 8.7 | 24.0 | 11.5 | 1.75 | 16.0 | 0.5 | 12.2 |
| Φ10×7.7 | 10.7 | 10.7 | 24.0 | 11.5 | 1.75 | 16.0 | 0.4 | 8.2 |
| Φ10×12.4 | 10.7 | 10.7 | 24.0 | 11.5 | 1.75 | 16.0 | 0.5 | 12.9 |
3-4. Reel dimensions [Unit : mm]
| Case size | A ±2.0 |
B ±1.0 |
C ±0.5 |
D ±1.0 |
E ±0.5 |
W ±0.8 |
t ±0.3 |
R |
|---|---|---|---|---|---|---|---|---|
| Φ4×5.2 | 380 | 80 | 13.0 | 21.0 | 2.0 | 13.5 | 2.4 | 1.0 |
| Φ5×5.7 | 380 | 80 | 13.0 | 21.0 | 2.0 | 13.5 | 2.4 | 1.0 |
| Φ6.3×5.7 | 380 | 80 | 13.0 | 21.0 | 2.0 | 17.5 | 2.4 | 1.0 |
| Φ6.3×7.7 | 380 | 80 | 13.0 | 21.0 | 2.0 | 17.5 | 2.4 | 1.0 |
| Φ8×6.7 | 380 | 80 | 13.0 | 21.0 | 2.0 | 25.5 | 2.4 | 1.0 |
| Φ8×7.7 | 380 | 80 | 13.0 | 21.0 | 2.0 | 25.5 | 2.4 | 1.0 |
| Φ8×11.7 | 380 | 80 | 13.0 | 21.0 | 2.0 | 25.5 | 2.4 | 1.0 |
| Φ10×7.7 | 380 | 80 | 13.0 | 21.0 | 2.0 | 25.5 | 2.4 | 1.0 |
| Φ10×12.4 | 380 | 80 | 13.0 | 21.0 | 2.0 | 25.5 | 2.4 | 1.0 |
4. Mounting condition (Recommendation)
| Item | Recommended Condition 1 | Recommended Condition 2 |
|---|---|---|
| Peak Temperature | 260ºC or less | 250ºC or less |
| Preheating | 150ºC to 180ºC 90 seconds |
150ºC to 180ºC 90 seconds |
| A | 200ºC and higher Within 60 seconds |
200ºC and higher Within 60 seconds |
| B | 230ºC and higher Within 40 seconds |
230ºC and higher Within 40 seconds |
| The number of reflow | Only 1 time | Twice or less |
5. Recommended land size
Land size[Unit : mm]
| ΦD×L | a | b | c |
|---|---|---|---|
| Φ4×5.2 | 1.0 | 2.6 | 1.6 |
| Φ5×5.7 | 1.4 | 3.0 | 1.6 |
| Φ6.3×5.7 | 2.1 | 3.5 | 1.6 |
| Φ6.3×7.7 | 2.1 | 3.5 | 1.6 |
| Φ8×6.7 | 2.8 | 4.2 | 1.9 |
| Φ8×7.7 | 2.8 | 4.2 | 1.9 |
| Φ8×11.7 | 2.8 | 4.2 | 1.9 |
| Φ10×7.7 | 4.3 | 4.4 | 1.9 |
| Φ10×12.4 | 4.3 | 4.4 | 1.9 |